Together with the ability to quickly read and clear DTCs for all available modules of the majority of the makes and models on the market, MaxiCOM MK808TS provides you with superior special functions, including Oil Reset, EPB (Electronic Parking Brake), SAS (Steering Angle Sensor), BMS (Battery Management System), DPF (Diesel Particulate Filter) and IMMO. In addition to OBD II diagnostics and special service, MK808TS enables you to carry out complete TPMS functions, including TPMS health check, sensor activation & programming and TPMS relearn.
WIRELESS BLUETOOTH MAXI-VCI MINI
The latest compact size Wireless Bluetooth MaxiVCI Mini OBDII connector can transmit vehicle data to the tablet without a physical connection. Enhanced wireless bluetooth connectivity between the tablet and VCI device allows greater service mobility and easier TPMS sensor interaction while the tablet is still connected to the vehicle for data transmission.
COMPLETE TPMS FUNCTIONS
MK808TS, being available to activate 98% of all-known TPMS sensors, provides the most advanced TPMS diagnosis and the most comprehensive OBD relearn coverage for a complete TPMS health check, allowing technicians to solve TPMS related problems with a series of quick and effective operations:
The Check function allows users to activate TPMS sensors to view sensor data – sensor ID, tire pressure, tire temperature, battery condition and sensor location.
The Diagnosis function is used to check the status of the TPMS system. communication with ECU and to retrieve sensor IDs and DTCs in the TPMS ECU. ， view the data stream of the sensor information.Special Functions ,Active Test. initiate desired vehicle lamp function list
The Programming function allows users to program the sensor data to the MX-Sensor and replace faulty sensor with low battery life or the one that is not functioning. There are four options available when programming MX-Sensor:
1.Copy by Activation - Once the sensors mounted on the vehicle have been triggered and the sensor information displayed on the tool, the Copy by Activation can be used to program a new MX-Sensor.
2.Copy by OBD - By using this function, the tablet will program the sensor IDs retrieved from the ECU of the test vehicle to the new MX-Sensors.
3.Copy by Input - The Copy by Input allows users to program a new MX-Sensor with the ID of an original TPMS sensor.
4.Auto Create - The Auto Create function is used to automatically create a random sensor ID to program a new MX-Sensor.
This function is used to write the newly programmed sensor IDs into the vehicle ECU for sensor recognition. There are three ways for Relearn: Stationary Relearn; Active Relearn; OBD Relearn.
TPMS by OEM Part No.:
If the sensor’s OEM part number is known, this function is an efficient method to activate and program MX-Sensors.
ALL SYSTEMS DIAGNOSTICS
Besides featuring the quick and precise full OBDII functions, this automotive diagnostic scanner can also work on all available system modules in vehicles for technicians to diagnose complex problems accurately.
1. Read/clear codes for all available electronic systems;
2. Turn off warning lights;
3. Display live data in text, graph & analog for easy data review;
4. Supports all 10 test modes of the latest J1979 OBD II test specs;
5. Enhanced OBDII Mode 6;
To diagnose Brake System:
if you feel the brake pedal is mushy and notice unusual odor or noise, etc. A properly operating brake system is critical to ensure safe vehicle control and operation;
To diagnose Emission System:
if the system is affected by vehicle age or poor quality fuel. A good emission system reduces harmful gases to a large degree and protects you from being fined;
To diagnose Fuel system:
if vehicle won’t start or “Check Engine” light is illuminated. Check car’s fuel system regularly ensures the best performance of your car with the lowest emissions;
To diagnose Transmission:
if your car is slipping or difficult to shift. The system plays an important part in the overall performance of your car;
To diagnose Wiper System:
if you observe chattering or streaking wiper. If the car is not regularly checked, the accident might happen because you can’t see clearly;
To diagnose Light System
if you see rapid signal blinking or dimming lights.
And many more ...
The MaxiCOM diagnostic system supports 4 methods for Vehicle Identification.
1. Auto VIN Scan
The MaxiCOM diagnostic system features the latest VIN-Based Auto VIN Scan function to identify vehicles and scan all the diagnosable ECUs and run diagnostics on the selected system. This function is compatible with 2006 and newer vehicles.
2. Manual VIN Input:
For vehicles not supporting the Auto VIN Scan function, you may manually enter the vehicle VIN.
3. Automatic Selection:
The Auto VIN Scan can be selected after selecting the test vehicle manufacturer.
4. Manual Selection:
When the vehicle's VIN is not automatically retrievable through the vehicle's ECU, or the specific VIN is unknown, the vehicle can be manually selected.
COMPLETE OBD2 FUNCTIONS
Show the detailed description of the Diagnostic Trouble Code (DTCs)
Erasing Codes & Reset:
Turns off Check Engine Light (MIL), clears codes and resets monitors.
Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
I/M Readiness Status:
Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
Read Live Data Stream:
Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
View Freeze Frame Data:
Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
O2 Sensor Test:
Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.
On-Board Monitor Test:
Retrieves and displays test results for emission-related powertrain components and systems.
Read Vehicle Information:
Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
Certain vehicle components can be actuated by commands sent from the scanner to test their operability.
ADVANCED SERVICE FEATURES
MK808TS provides the most commonly-performed capabilities including Oil reset, EPB/SAS/BMS/DPF/IMMO service as MaxiCOM MK808 & MX808TS does, to meet users’ demand for efficient repairs.
lOil reset service allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil.
plays an important role in the maintenance of electronic braking system’s safety and efficiency.
allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.
specially works for Diesel Particulate Filter system with DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.
helps clear the faulty steering angle sensor memories and plays an important role in the steering angle sensor calibration.
is mainly used to disable the lost vehicle keys and program a new replacement key fob.
And Many More...
Remote Technical Support
By using this function, users can receive ad-hoc remote support from Autel’s technical engineers, colleagues, or friends, by allowing them to control this tablet device on their PC via the TeamViewer software.
Multiple Vehicle Models
For Acura, Daewoo, Holden, Honda, Hyundai, Infiniti, Isuzu, Kia, Lexus, Mazda, Mitsubishi, Nissan, Scion, SsangYong, Subaru, Suzuki, Toyota, BYD, ChangAn, Chery, DFM, FAW, Foton, Geely, GreatWall, Haval, JAC, Lifan, Luxgen, MG, Zotye
For Abarth, Alfa-Romeo, Alpina, AstonMartin, Audi, Bentley, Benz, BMW, Citroen, Dacia, Ferrari, Fiat, Jaguar, Lamborghini, Lancia, LandRover, Lotus, Maserati, Maybach, Mini, Opel, Peugeot, Porsche, Renault, Rolls-Royce, SAAB, Skoda, Smart, Volvo, Volkswagen
For Buick, Cadillac, Chevrolet, Chrysler, Dodge, Ford, GMC, Hummer, Jeep, Lincoln, Mercury, Oldsmobile, Pontiac, Saturn, Tesla
AUTEL MaxiCOM MK808TS Advanced Hardware
tablet diagnostic tool greatly improves the working efficiency with performance and power optimized 1.5GHZ Cortex-A9 Processor.
7 inch touchable LCD screen
with 1024*600 resolutions offers ultra-clear visuals of the diagnostic data, making it easy to navigate and read codes.
1GB RAM DDR3 / 32GB
On-Board ROM Memory is not only an extended storage space but a way to reduce the possible issue of slow response.
Built-in 5000 mAh battery
provides up to 7 hours continuous battery life for giving you a worry-free operation experience.
is equipped for connecting between the diagnostic tablet and DLC for wirelessly vehicle data transmission via the fast and reliable Bluetooth 2.1 EDR, allowing technicians to have complete freedom to move anywhere in the repair shop when the VCI is connected to the car.
Perfect Combination for a Diagnostic Scan Tool
Compared with MK808:
Autel MK808TS offers the same features and functions as MK808 does, also it comes with additional benefit of TPMS function to perform TPMS Sensor Check, TPMS Relearn, TPMS Sensor Programming to all known OEM/Universal TPMS sensors for helping technicians to quickly locate the faulty sensor and turn off the MILs related.
Compared with TS608:
Autel MK808TS offers the same features and functions as TS608 does.
AUTEL MaxiCOM MK808TS Interface Display:
How to use Autel MaxiCOM MK808TS?
||AndroidTM 4.4.2, KitKat
||Cortex-A9 processor (1.5 GHz)
||7-inch LCD capacitive touchscreen with 1024 x 600 resolution
Mini USB 2.0
HDMI Type A
Micro SD card (supports up to 32GB)
||Light sensor for brightness auto changing
|Power and Battery
3.7 V/5000 mAh lithium-polymer battery
Charges via 5 VDC power supply
|Tested Battery Life
||Around 7 hours of continuous use
|Battery Charging Input
||5 V/1.5 A
||600 mA (LCD on with default brightness, Wi-Fi on) @3.7 V
||0 to 55°C(32 to 131°F)
||-20 to 60°C (-4 to 140°F)
||5% - 95% non-condensing
|Dimensions (W x H x D)
||270.8 mm (10.0”) x 176.0 mm (6.9”) x 36.0 mm (1.4”)
||885 g (2.31 lb.)
||ISO9141-2, ISO14230-2, ISO15765, K/L-Line, Flashing Code, SAE-J1850 VPW, SAE-J1850PWM, ISO11898 (Highspeed,
Middlespeed, Lowspeed and Singlewire CAN, fault-tolerant CAN), SAE J2610,GM UART,UART Echo Byte Protocol, Honda Diag-H
Protocol, TP2.0, TP1.6
Step 1: Visit official website:www.autel.com,then create an Autel ID and register the product with device's SN and password.
Step 2: Insert the MaxiVCI Mini into the vehicle's DLC,which is generally located under the vehicle dash.
Step 3: Long press the Lock/Power button to turn on the Diagnostic Table.
Step 4: Pair up the Diagnostic Table with the VCI device via Bluetooth to establish a communication link
When the VCI device is properly connected to the vehicle and the Diagnostic Tablet,the VCI status button at the buttom bar on the display screen shows a green tick at the corner.This indicates your Diagnostic Tablet is ready to start vehicle diagnosis.
How to Update Autel MaxiCOM MK808TS?
Note:Make sure the diagnostic tablet is connected to the internet and the tablet has sufficient battery or is connected to a power source.
Step 1:Tap the Update application button from the Diagnostic Job Menu and the Update screen displays.
Step 2:Check all available updates:
a) if you want oto update all the items,tap the "Update All" button
b) if you want to update one or some of the item,tap the "Update" button on the right column of the specific item(s).
Step 3:Tap "Pause" to suspend the updating process.Tap "Continue" to resume.
Step 4: When the updating process is completed,the software will be installed automatically.The previous version will be replaced.
MaxiVCI Mini Firmware Update:
Step 1:Connect the MaxiVCI Mini to a PC using a USB cable.
Step 2:Run the "PC Suite" on the computer which is installed after the installtion of Maxi PC Suite and click MaxiVCI Mini icon on the Device Selection window.
Step 3:The driver will automatically detect the updates of the device.
Step 4:Click "Update" to complete the operation if an update is available.
Step 1:Connect the MaxiVCI Mini with the Diagnostic Tablet using a USB cable.
Step 2:Tap VCI Manager from the Diagnostics Job Menu,and then Update to complete the operation if an update for the MaxiVCI Mini is available.
AUTEL MK808TS Display:
3-5 working days. Fast Delivery No Tax.
5-7 working days, you need pay some tax to your customs. Usually we declare a lower price on DHL invoice to help with customs clearance. If your address belongs to remote area, customer will need to pay remote handling cost. Please remember to leave message if you have any special requirement.
10-15 working days. No Tax or remote cost for European Countries.
Just for United Kingdom. No Tax, and the delivery is about 7-10 days.
The delivery is about 15-20 days, no tax. Order under $150 normally with default shipping Standard Post, customers can tick for Express Shipping Service to ship by DHL.
Almost all item has one year warranty.
We also offer free fix to almost item we sold within one year, free repair. Man-made damage need pay.
We not offer warranty on keys,cables,adapter,online sent software ,please notice it.