GODIAG GT100 is a latest testing platform for OBDII protocol communication detection and ECU maintenance /diagnosis /programming /coding.
It can convert the car OBD2 interface into 16 pin for signal detection and electrical level conversion.
Able to connect the single modules or multiple modules of the vehicle.
It can be connected with any diagnostic tool to tell whether the car communication is good or not.
It can also supply power to the car when you change the battery to avoid the vehicle control module data being lost, automatically locked, the key remote control fails and the fault light turns on.
GODIAG GT101 PIRT Power Probe is a multi-use circuit-tester with the diagnostic power from the car battery or the external battery. It is the best electrical tester for reducing diagnostic time in all 6- to 40-volt vehicle electrical systems. Undoubtedly it is the most versatile and practical tool ever for its users.
Godiag GT105 Breakout Box Plus GT107 DSG Gearbox Data Read/Write Adapter for PCMTuner Kess V2 PCMFlash KTMBench
GODIAG ECU IMMO Prog AD GT105 is a special connection adapter developed for automobile maintenance technicians, anti-theft matching technicians, ECU programming engineers, etc.
It is used for short-circuiting OBD2 in the car for anti-theft activation matching, ECU diagnosis and programming connection, and drawing power from the vehicle’s battery for outdoor on-site vehicle maintenance.
Full protocol OBD2 jumper Breakout Tricore Cable is used to connect ECU for ECU programming via OBD2 way such as MMPS, FGTECH, KESSV2, BYSHUT, DISPROG, etc.
1. GODIAG GT100 Breakout Box with BMW CAS4 CAS4+ and FEM/BDC Test Platform.
2. Work with AUTEL IM508, IM608, VVDI2, VVDI KEY TOOL PLUS, CGDI BMW, Lonsdor K518ISE etc.
![[Ship from UK/EU] GODIAG For BMW FEM/ BDC Programming Test Platform Works with Autel IM608 VVDI2 CGDI](/upload/pro-sm/21031116155231237293.jpg)
1. GODIAG BMW FEM/BDC Test Platform is a dedicated device developed for BMW locksmiths, maintenance engineers and FEM/BDC programming engineers.
2. Work with Xhorse VVDI2/Key Tool Plus Pad, Autel IM608, CGDI BMW etc.
![[EU Ship No Tax] GODIAG GT109 DOIP-ENET Diagnostic Programming Cable for Vehicles Supporting DOIP Protocol](/upload/pro-sm/24051517157665098340.jpg)
GODIAG GT109 DOIP-ENET Diagnostic Programming Cable for Vehicles Supporting DOIP Protocol
GODIAG ECU GPT Boot AD programming adapter can help customers read and write ECU data without disassembling the ECU using the OBD2 Bench or GTP Bench method or disassembling the ECU and using the Boot method. This product is equipped with a short-circuit-proof BOOT resistance board connection line to protect the ECU. Customers can use it with J2534 devices and PCMFLash software.
![[UK/EU Ship] GODIAG Test Platform For BMW CAS4 CAS4+ Programming](/upload/pro-sm/21012616116502404398.jpg)
GODIAG GT100 with BMW CAS4 & CAS4+ Test Platform can program new key when all keys lost, add new key and replace CAS4 / CAS4+ ECU module by working together with Xhorse VVDI2, VVDI BIM Tool Pro, Lonsdor k518 and Autel im608 etc.
GODIAG GT103 Mini Pirt Electric Circuit Tester is a multi-use circuit-tester with the diagnostic power from the car battery or the external battery. It is the best electrical tester for reducing diagnostic time in all 6-30 volt vehicle electrical systems.
This tool simplifies the testing of fuse boxes, verifies the correct operation of motors, lights, relays, sensors, wires, and communication-circuits. Thus GT103 is the most versatile and practical tool ever for its users.
![[UK/EU Ship] GODIAG GT100 Plus GODIAG Programming Test Platform For BMW CAS4 and CAS4+](/upload/pro-sm/21012816118218212068.jpg)
GODIAG GT100 Plus GODIAG Programming Test Platform For BMW CAS4 & CAS4+ together can program new key when all keys lost, add new key and replace CAS4 / CAS4+ ECU module by working together with Xhorse VVDI2, VVDI BIM Tool Pro, Lonsdor k518 and Autel im608 etc.
Godiag CAS2 CAS3 SER Semi Smart Test Platform is a dedicated device developed for BMW locksmiths, maintenance engineers and CAS2 / CAS3,CAS3+ CAS3++ programming engineers. It can cooperate with the key programming devices like Xhorse Key Tool Plus Pad / Xhorse vvdi 2 / bmw vvdi bim tool / Autel im608 / CGDI BMW / Lonsdor devices, OBDSTAR devices, etc., to perform all key lost matching or key addition operations. This product is suitable for magnetic semi-intelligent or smart keys.
1. GODIAG GT105 is used for short-circuiting OBD2 in the car for IMMO activation matching, ECU diagnosis and programming connection, and drawing power from the vehicle’s battery for outdoor on-site vehicle maintenance.
2. Full protocol OBD2 universal jumper is used to connect ECU for ECU programming via OBD2 way such as MMPS, FGTECH, KESSV2, BYSHUT, DISPROG, etc.
![[UK/EU Ship] GODIAG BMW CAS4 / CAS4+ and GODIAG BMW FEM/ BDC Programming Test Platform](/upload/pro-sm/21031816161214306658.jpg)
1. GODIAG BMW-CAS4 adapter testing platform is used to detect whether the key that is programmed can work perfectly with the CAS4.
2. Godiag for BMW FEM / BDC programming test platform is a dedicated device developed for BMW locksmiths, maintenance engineers and FEM / BDC programming engineers.
![[EU/UK Ship] GODIAG GT100 Pro Breakout Box ECU Tool + BMW CAS4 CAS4+ FEM/BDC Test Platform Used with IM508 IM608 VVDI2 CGDI BMW](/upload/pro-sm/24090617256158913875.jpg)
1. GODIAG GT100 Pro Breakout Box with BMW CAS4 CAS4+ and FEM/BDC Test Platform.
2. Used with AUTEL IM508, IM608, VVDI2, VVDI KEY TOOL PLUS, CGDI BMW, Lonsdor K518ISE and so on.
GODIAG J2534 Compatible with J2534 Passthru & ELM327 Diagnose J1979 Compatible Vehicles Switch Mode Automatically
GODIAG GT100+ AUTO TOOLS OBD II Break Out Box ECU Connector
GODIAG GT110 FOR VW Audi Skoda Seat CAN-Bus UDS 4th Generation IMMO System Test Platform Cable with POGO PIN to Read & Write POGO PIN Data
GODIAG BMW CAS1/CAS2 Mech-Key Test Platform is a dedicated device developed for BMW locksmiths, maintenance engineers and CAS1 / CAS2 programming engineers. It can cooperate with the key programming devices like Xhorse Key Tool Plus Pad / Xhorse vvdi 2 / bmw vvdi bim tool / Autel im608 / CGDI BMW / Lonsdor devices, OBDSTAR devices, etc., to perform all key lost matching or key addition operations. Please note that this product is only suitable for mechanical keys.
