Autel MaxiIM IM608 Pro with upgraded key programmer XP400 Pro is the most advanced key programming tool that combines the powerful IMMO and programming functions with OE-level diagnostics and advanced service functions in one Android-based 10.1-inch touchscreen tablet.
Original Autel MaxiIM IM608 PRO Auto Key Programmer & Diagnostic Tool
Autel MaxiIM IM608 PRO Highlights:
1. Upgraded Version of Autel IM608
2. Promotion: Two Years Free Update Online on Autel Official Website if register between 9th Aug-30th Sept.
After subscription expire, you can buy the Autel im608 pro update service
3. Comes with XP400 Pro which adds more functionality for BMW, Mercedes-Benz, as well as EEPROM reading
4. Could be used with IMKPA Accessories
(Need to Buy Separately) Which adds BMW EWS3 key learning, Benz NEC key learning and Benz ESL_W209 read/write/erase
5. Extensive Vehicle Coverage
- IM608 Pro can support most of the models on the market, including European models, American models, Asian models and so on. include BMW, BENZ, VW, AUDI, Volvo, Ford, Mazda etc
Professional IMMO & Key Programming Tool - IM608 Pro can perform complete IMMO & Key programming functions, like read PIN, key learning (for BMW CAS4/3/2, for Benz FEM/BDC key, for VW/Audi/Skoda/Seat IMMO III/IV/V key), remote learning, key generation, IMMO ECU reset/ adaptation/ refresh/ coding, IMMO data backup, Read & Write transpronder, Read & Write EEPROM/MCU, Read & Write Mercedes Infrared Key.
6. Advanced Diagnostic Tablet
- In addition to the top-level IMMO & Key Programming function, IM608 Pro also has the same level of diagnostic function as MK908
. It supports advanced functions such as Bi-Directional Control, Special Functions, ECU Coding, etc. in addition to the basic code reading and clearing and reset service functions.
7. Adapt to Many Situations
- Smart Mode for Guided and Automated Key Learning, Expert Mode for Advanced Key Learning
8. Support Multiple Languages: Diagnose Software:
the default Language is English, can change into other languages, such as French, German, Spanish, Portuguese, Dutch, Polish, Swedish, Korean, Japanese, Russian, Italian, Traditional Chinese;
Also supports multiple languages
Autel IM608 Pro Features:
Advanced IMMO & Key Fob Programming Bundle
- Advanced IMMO & Key Fob Programming Bundle;
- Equipped with XP400 PRO & MaxiFlash JVCI (J2534-1&-2);
- Powerful Combination of Key Fob Programming/All System Diagnostics/31+ Maintenances/…
- Smart Mode & Expert Mode for Key Learning;
- ECU Online Coding & ECU Coding, Same as Autel MaxiSys MS908;
- IMMO Programming for BMW & for MB;
- Bi-Directional Control (Active Tests);
- 10000+ Vehicle Coverage & Support AutoAuth for SGW Access;
- High-End Configurations: 10.1" LED Touchscreen with 1920*1200 resolution; Android4.4.2, KitKat OS; Samsung Exynos Hexa-Core Processor (1.3GHz 4-Core ARM Cortex-A7 + 1.7GHz 2-Core ARM Cortex-A15); 2GB RAM & 64GB ROM; 15000mAh Battery
Upgraded from IM508/IM608, Autel top-level IMMO & key programmer immobilizer bundle IM608 Pro
can perform key learning directly through the OBD port for over 85% of car models in North America. The IMMO & key fob programming tool IM608 Pro can also read the immobilizer pin codes and password directly from the vehicle and store the information to do key learning for the newly programmed keys.
Upgraded from IM508/IM608, key programmer immobilizer for all vehicles bundle IM608 Pro can do the following functions to help mechanics/technicians greatly improve work efficiency and maximize profits:
- Read PIN / CS (All Key Lost)
- Key Generation
- Key / Remote Learning
- Backup / Restore IMMO Data
- IMMO ECU Reset / Adaptation / Refresh / Coding
- BENZ 3rd Generation IMMO Add Key, All Key Lost, Key Learning
- BMW FEM / BDC Key Learning and ECU Adaptation
- BMW CAS4/3/2 Key Learning
- VW / AUDI MQB Key Learning, 48 Transponder (96-bit) Add Key, All Key Lost, A6 All Key Lost
Innovative Two Operation Mode for IMMO Functions
To make this tablet easier to use, the Autel MaxiIM IM608 Pro has developed an unique features that is not avaliable on other brand-- “ Smart Mode & Expert Mode” to facilitate users at different skill levels, make it appliacble for users no matter you are a beginer technicians or technician master.
Smart Mode: For DIYers & Home Mechanics:
The Smart Mode provides guided functions with step-by-step instructions and all you need to do is to follow the instructions and click "Yes" and everything is you need will be completed.
Example: Smart Mode For BMW
- FEM/BDC IMMO system-- Automatically save data and prevent a car from being locked.
- FEM/BDC IMMO system-- IMMO ECU fixing.
- New B48/B58 Engine – Read ISN via OBD (Chassis F).
- Pairing with G-Box to Read/Write ISN for most engines.
Expert Mode: For Skilled Technicians:
Expert Mode is for skilled technicians and all functions is separated and you can select the needed options to start your work, which is much more efficient and time-saving.
Autel XP400 Pro – All-In-One Key & Chip Programmer
Based on the Autel XP400, key programmer immobilizer XP400 Pro has been optimized in structure, materials, and functionality, making it more powerful & stable than XP400. It can
- Read/Write Transponder Data;
- Read/Write MC9S12 Encryption Chip & IC Card
- Read/Write ECU / MCU / EEPROM Data
- Read/Write Mercedes Infrared Key
- Detect Remote Frequency
Moreover, this advanced key & chip programmer XP400 Pro
can access much more key chip types (3,000+ chip types, including EEPROM, engine ECU, MCU, IMMO ECU) to read & write key information, learn keys to the vehicle, as well as other key related functions:
Advanced ECU Coding and Full Bi-directional Control/ Active Tests
Advanced ECU Coding & Online Coding, Customize Your Cars as You Like
- Expanded EEPROM functions for more component access
- 170+ types Odometer component reading functions;
- 180+ Immobilizer ECU component types;
- 40+ Engine ECU component types;
- 2000+ MCU component types;
- 440+ EEPROM component types;
- Compatible with IM508, IM608, and IM608 Pro;
Full Bi-Directional Control/ Active Tests/ Component Tests
- Match, Learn, Code the newly replaced ECU after the replacement of ECUs/ modules.
- Refresh Hidden Functions, such as Daytime Running Lights, Auto Side Mirrors Folding, Auto Park Function, etc.
- Help to change reprogrammed options in the software for better car performance.
- Customize OE-Setting; Disable the Annoying Functions; Component Matching.
- And more...
IM608PRO Key programming tool comes with bi-directional control capability which enables technicians to conduct component test on systems, sub-systems or other pars like ABS pump, valves, window, door, roof, lamps and etc to check if the component is working functionally in daily maintenance or after repair. For example:
OE-Level All Systems Diagnostic, Same as Autel MaxiCOM MK908/ MK908P
- Fuel Injector Balance, Cylinder Power Balance, Fuel Trim Reset, Fuel Composition Reset, Fuel Pump Enable, Fuel Trim Enable
- A/C Compressor Clutch Relay On/Off
- Cycling ABS Pump Motor
- EVAP Tests: EVAP Purge Solenoid Valve, EVAP Vent Solenoid Valve, EVAP Purge/Seal, EVAP Service Bay Test
- Switch on/off car wipers
- Rolling up/down car windows/ doors/ sunroof
- Interior lighting test
- OE-Level All Systems Diagnostics:
IM608 PRO has the same level diagnostic capabilities as MK908, MK908P. It can access and scan all available electronic systems to perform OE- level diagnostics, including read and clear codes, view live data steam, ECU information, perform various active tests, matching & adaptations, ECU Coding and etc.
- MaxiFlash J-2534 VCI Wireless Connection:
Among all methods, BT pairing is recommended as the first choice for the communication between the Scanner and the MaxiFlash. Come with the MaxiFlash J-2534 VCI, Autel IM608 Pro can transmit data wirelessly over a range of about 210 feet (70m), that is, you can perform key fob programming and vehicle diagnosis around the workshop with greater convenience.
36+ Special Functions to Meet Most Car Module Maintenance & Reset Need
As a professional diagnostic tool, Autel IM608 Pro 2022 version offer up to 36 special services functions and much more will be added with the frequent software updation.
Here below we listed some of the most popular services:
Powerful Tool Kit for Extended Function
Autel MaxiIM IMKPA
- Oil Reset: Turn off the oil light, and reset the service mileage.
- EPB : For the maintenance of electronic braking system’s safety and efficiency.
- SAS : Reset the position of the steering for safe driving.
- BMS: Reset the monitoring unit of the car battery after replacing battery or battery monitoring sensors.
- DPF Regeneration: Specially works for Diesel Particulate Filter system with DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.
- ABS Bleed: Cycling the ABS system to bleed the air out of the ABS system before traditional bleeding.
- Injector Coding: Coding the new injector after replacement.
- Throttle Adaptation: Adjusts the throttle position for controlling the volume of intake air.
- Still growing......
- IMKPA, a Key Programming Adapter Kit, is designed to work with XP400 Pro + IM608 (Pro) to enhance the IMMO functions for BENZ, BMW, Audi, VW, etc. It includes 12 adapters: APB113, APB114, APB115, APB118, APB119, APB120, APB121, APB122, APB123, APB126, APB127, APB128, and 1 storage case. * MUST BE USED WITH XP40O PRO
- The Autel G-BOX2 accessory tool is an adapter working with Autel IM608 Pro + XP400 Pro to help program keys faster for Mercedes DAS3 CAN EIS/EXS in an ALL-Keys-Lost situation. Also, the G-Box2 supports DME/DDE ISN Reading and Writing in Boot Mode on applicable BMW vehicles and can be used in Bench Method.
10000+ Vehicle Coverage
- Designed to work with Autel IMMO key programming tools, Autel APB112 smart key simulator can work with IM608 PRO to collect data from the ignition coil, identify ignition coil troubles, collect vehicle key chip data, decode chip (Hyundai 46), simulate vehicle key chip (ex-4D chip), simulate Toyota and Lexus smart keys, and solve Toyota & Lexus smart key all-key-lost issues, etc.
This Autel OBD1 OBD2 diagnostic scanner supports 80+ makes, 10000+ Models worldwide, almost fully covering all the cars in repair shops.
IM608PRO& IM608& IM508 Comparison
Autel IM608 PRO Specifications:
- Cover American, European, and Asian makes and models from 1996-2022;
- Compatible with GM, Chrysler, Ford, Mercedes, BMW, Volkswagen, Skoda, Jaguar, Jeep, Land Rover, Toyota, Honda, Nissan, Lexus, Kia, Hyundai, etc.
- Being updated frequently for more models and the latest models
MaxiIM IM608 Pro includes:
||AndroidTM 4.4.2, KitKat
||Samsung Exynos hexa-core Processor (1.3GHz Quad-core ARM Cortex-A7 + 1.7GHz Dual-core ARM Cortex-A15)
||2GB RAM & 64GB On-board Memory
||10.1-inch LED capacitive touch screen with 1920x1200 resolution
||Wi-Fi (802.11 a/b/g/n/ac)
BT v.2.1 + EDR
SD Card (Support up to 32GB)
||8.0 Megapixel, AF with Flashlight
||Gravity Accelerometer, Ambient Light Sensor (ALS)
3-Band 3.5 mm stereo/standard headset jack
|Power and Battery
||15000 mAh 3.8 V lithium-polymer battery
Charging via 12 V AC/DC power supply with the temperature between 0°C and 45°C
||12 V (9-24 V)
||0 to 50°C (32 to 122°F)
||-20 to 60°C (-4 to 140°F)
|Dimensions (W x H x D)
||300 mm (11.81”) x 220 mm (8.66”) x 50 mm (1.97”)
||NW: 1.42 kg (3.13 lb.) GW: 8.655 kg (19.08 lb.)
||ISO 9142-2, ISO 14230-2, ISO 15765-4, K/L-Line, Flashing Code, SAE-J1850 VPW,
SAE-J1850 PWM, CAN ISO 11898, Highspeed, Middlespeed, Lowspeed and Singlewire CAN,
GM UART, UART Echo Byte Protocol, Honda Diag-H Protocol, TP 2.0, TP 1.6, SAE J1939,
SAE J1708, Fault-Tolerant CAN
1pc x MaxiIM IM608 Tablet
1pc x XP400 Pro Key Programmer
1pc x MaxiFlash JVCI ECU Reprogrammer
1pc x Carry Case
1pc x Main Cable
1pc x USB Cable (2m)
1pc x Mini USB Cable
1pc x AC/DC Adapter (12V)
1pc x Light Fuse - 6*30mm (2pcs)
1pc x Cigarette Lighter
1pc x AAC001
1pc x APC101 (USB Cable)
1pc x APB129 (EEPROM Adapter)
1pc x APB125 (Mercedes Infrared Collector)
1pc x APB103 (MCU_PLCC52)
1pc x APB104 (MCU_FQFP64)
1pc x APB105 (MCU_FQFP80)
1pc x APB106 (MCU_FQFP112)
1pc x APB107 (MCU_FQFP144)
1pc x APB108 (MCU_FQFP176)
1pc x APB109
1pc x APB110 (MCU_FQFP176)
1pc x APB111 (MCU_FQFP176)
1pc x APA002 (EEPROM Socket)
1pc x APA101 (Signal Cable)
1pc x APA103 (EEPROM Clamp)
1pc x APA107 (ECU Clamp)
1pc x APA108 (MCU Clamp)
1pc x APA109 (MC9S12 Clamp)
1pc x Connect Cable
2022 Hottest ECU Programmer PCMTunerOriginal Launch X-431 Best Seller, Up To 30% OffAny questions, please don't hesitate to contact us:Email: sales@CarDiagTool.co.ukSkype: cardiag.co.uk
Whatsapp: +86 15002705698Scan QR Code to Order By Mobile PhoneShipping Method & Delivery:UK/EU Warehouse Shipping:
3-5 working days. Fast Delivery No Tax.
EU Check: Ship from EU
UK Check: Ship from UKDHL Shipping:
5-7 working days, you need pay some tax to your customs. Usually we declare a lower price on DHL invoice to help with customs clearance. If your address belongs to remote area, customer will need to pay remote handling cost. Please remember to leave message if you have any special requirement.Yanwen Express:
10-15 working days. No Tax or remote cost for European Countries.Yodel/Royal Mail:
Just for United Kingdom. No Tax, and the delivery is about 7-10 days.Standard Post:
The delivery is about 15-20 days, no tax. Order under $150 normally with default shipping Standard Post, customers can tick for Express Shipping Service to ship by DHL.
Almost all item has one year warranty.
We also offer free fix to almost item we sold within one year, free repair. Man-made damage need pay.
We not offer warranty on keys,cables,adapter,online sent software ,please notice it.