SVCI 2020 IMMO Diagnostic Programming Tool with 37 software,covers all functions of SVCI 2018. All the Abrites commander software has higher version, newly add JLR/Suzuki/Daihatsu full fuction.
1. NO LIMITS of the car model and year + NO NEED disassemble ECUs. Read and write Bosch ECUs (Infineon's chips) incl. flash and eeprom
2. LESS RISK to clone/copy ECUs. Able to modify data or do chip tuning to achieve superior performance
3. MUCH CHEAPER, compared with the same functional tools. The price is 1/10 of other programming tools in the market
Humzor NexzDAS Pro is the high-end professional and intelligent diagnostic equipment newly released by Humzor.
Featuring the powerful tablet with 9.6 inch screen and based on Android 7.0 multitasking operating system, it greatly provides a quick access to read/clear codes for all the available modules of wide vehicle makes, and offers the perfect diagnostic solution for mechanics who demand unrivaled OE level smart technology and smart repair.
Online Version Kess V2 Firmware V5.017 support online service, can work with interent, no tokens need, newly add 140+ protocols. And V7.020 KTM100 KTAG supports many encrypted new car models works I.E Toyota 76FXXX, PSA 17.4.4, Ford E83, VW 17.5.5 (1766), Mercedes-Benz 276ECU, Toyota 76F, etc.
100+ ECU types added.
VXDIAG VCX SE BENZ Diagnostic & Programming Tool, Supports Almost all Mercedes Benz Cars from 2005 to 2020.
GODIAG GT100 is a latest testing platform for OBDII protocol communication detection and ECU maintenance / diagnosis / programming / coding.
It can convert the car OBD2 interface into 16 pin for signal detection and electrical level conversion.
Able to connect the single modules or multiple modules of the vehicle.
It can be connected with any diagnostic tool to tell whether the car communication is good or not.
It can also supply power to the car when you change the battery to avoid the vehicle control module data being lost, automatically locked, the key remote control fails and the fault light turns on.
X-100 PAD is a tablet with the latest technologies to perform key programming,mileage adjustment, oil service light reset, timing belt service light reset, tire pressure warning light reset, EPB reset, throttle body reset, DPF reset, battery reset, steering angle calibration and OBD-II engine diagnosis.
Xhorse VVDI Key Tool Max with VVDI MINI OBD Tool Bluetooth Update Version of Key Tool
V159 JLR Mangoose SDD Pro For Jaguar and Land Rover Support till 2017
LAUNCH X431 CRP 429C is an evolutionary smart solution for passenger car diagnosis It inherits from LAUNCH's advanced diagnosing technology and is characterized by covering a wide range of vehicles, featuring powerful functions, and providing precise test result.
BMW ELV Hunter CAS2 CAS3 CAS3+ E Series Emulator for Both BMW and Mini
Autel XP400Pro is a replacement for XP400. It adds more functionality for BMW, Mercedes-Benz, as well as EEPROM reading. With the new protocols, the end-user will be able to read over 2000 (chips, components, devices) types including EEPROM and MCU Read, additional Odometer Read/Write, and more. Also, added functions for EWS3, W209, NEC, and more
Xtool X100 PAD3 (X100 PAD Elite) is a professional tablet key programmer which not only provides customers with key programming, but also supplies advanced special functions.
With KS-1 Key Emulator, they can support Toyota/Lexus/VW/BMW Key Programming and All Key Lost.
Mercedes Benz DOIP-C5 Dedicated Diagnostic Tool for Cars and Trucks Without Software
Xhorse KEY TOOL PLUS Tablet is a professional locksmith tool that integrates the main functions of remote control and chip, anti-theft matching, programming, accessory replacement, maintenance reset, etc., and also reserves future expansion capabilities. One device can solve all the needs of daily work.
VXDIAG For XENTRY Diagnosis VCI is the latest interface for Mercedes & SMART vehicles can replace Star C4/C5. VXDIAG For XENTRY Diagnosis VCI acts as a Pass-through Interface, also called Star C6, For Benz C6 multiplexer to provide complete communication between a vehicle and the VXDIAG For XENTRY software loaded on a PC.
Autel G-Box2 is designed to be used on Mercedez-Benz vehicles with DAS3 CAN EIS/EZS in AKL. It helps to reduce the time for reading the ECU data from W204 and W207 EISs by over 85%.
THINKCAR pro's diagnostic capabilities are comparable to professional, expensive integrated diagnostic equipment. It supports full system, basic functions intelligent diagnosis, including reading version information, vehicle information, reading/clearing DTC, reading data stream, maintenance services, vehicle diagnostic reports, etc.
Buy ThinkCar Pro Get 5 free car software!
Xhorse VVDI Mini Key Tool Global Version with 10Pcs VVDI Super Chip Transponder
iAuto702Pro is an upgraded powerful multi-application service tool which covers the majority of special functions available on all brands in the market. Combined with Vident's technical strength and popularity of iLink450 on market,covering ABS and SRS diagnosis, iAuto702Pro offers at least 19 maintenances to help workshops