Launch X431 Pad 7 PAD VII Quick Start Guide, User Manual

---

Matched product:

1.Launch Tools Comparison Chart
2.How to Use Launch X431 SmartLink C as J2534 VCI?

1.Launch Tools Comparison Chart:
 

	Creader 919 MAX	X431 PRO3 SE	X431 PRO3 LINK	X431 PAD V	X431 PAD VII
Configuration
Display	7''/1024*600	10.1''/1280*800	10.1''/1280*800	10.1''/IPS 1920*1200	13.3''/IPS 1920*1080
CPU	2.0GHz Quad-core	2.0GHz Quad-core	2.0GHz Quad-core	2.0GHz Quad-core	2.0GHz Quad-core
Memory	4GB	4GB	4GB	4GB	8GB
Storage	64GB	64GB	64GB	128GB	256GB
Camera	8MP Rear	9MP Rear	9MP Rear	13MP Rear+8MB Front	13MP Rear+8MB Front
VCI Connector	DBScar VII	DBScar VII	Smartlink C 2.0	Smartlink C 2.0	Smartlink C 2.0
VCI Connection	Bluetooth/ USB Wired	Bluetooth/ USB Wired	Bluetooth/ USB Wired	2.4GHz& 5GHz dual Wi-Fi	2.4GHz& 5GHz dual Wi-Fi
Battery	47.880Wh(7.6V,6300mAh)	47.880Wh(7.6V,6301mAh)	47.880Wh(7.6V,6301mAh)	35.57Wh(3.8V,9360mAh)	71.1Wh(7.6V,9360mAh)
Adjustable Supporting Holder	N/A	√	√	√	√
IP65 Waterproof& Dustproof	N/A	N/A	N/A	√	√
Quick Charge Technology	N/A	N/A	N/A	√	√
Charging Station	N/A	N/A	N/A	Optional	N/A
Size(mm)	218*154*39.5(mm)	274*190.5*40.5(mm)	274*190.5*40.5(mm)	320*211*46(mm)	353*236*71(mm)
Add-on Modules	VSP-600 X431 TSGUN BST360	ADAS Calibration Tool X-PROG3 BST360 Wi-Fi Printer X431 TSGUN VSP600 Videoscope O2-2 Oscilloscope S2-2 Sensorbox EG100 EV Clamp EM101N EV Oscilloscope& Multimeter X431 Key Programmer ES200	ADAS Calibration Tool X-PROG3 BST360 Wi-Fi Printer X431 TSGUN VSP600 Videoscope O2-2 Oscilloscope S2-2 Sensorbox EG100 EV Clamp EM101N EV Oscilloscope& Multimeter X431 Key Programmer ES200	ADAS Calibration Tool X-PROG3 BST360 Wi-Fi Printer X431 TSGUN VSP600 Videoscope O2-2 Oscilloscope S2-2 Sensorbox EG100 EV Clamp EM101N EV Oscilloscope& Multimeter X431 Key Programmer ES200	ADAS Calibration Tool X-PROG3 BST360 Wi-Fi Printer X431 TSGUN VSP600 Videoscope O2-2 Oscilloscope S2-2 Sensorbox EG100 EV Clamp EM101N EV Oscilloscope& Multimeter X431 Key Programmer ES200
Features
OS	Android 10.0	Android 10.0	Android 10.0	Android 7.1 Open System	Android 9.0
Full System Diagnosis	√	√	√	√	√
OBDII Full Function	√	√	√	√	√
Tech-to-Tech Remote Diagnosis	√	√	√	√	√
Smartlink Remote Diagnosis	N/A	N/A	√	√	√
Auto VIN Identification	√	√	√	√	√
Bi-directional Control	√	√	√	√	√
Advanced Coding	√	√	√	√	√
VW& Audi Guided Function	√	√	√	√	√
J2534	N/A	N/A	√	√	√
DoIP/ CAN FD	DOIP Cable	DOIP Cable	√	√	√
Advanced Programming	N/A	Optional	Optional	√	√
Vehicle Coverage	Passenger Cars Medium& Light Duty Vehicles	Passenger Cars Medium& Light Duty Vehicles Heavy Duty Vehicles(optional) New Energy Vehicles& Battery Packs(optional) IMMO Diagnosis Add-on Kit(optional)	Passenger Cars Medium& Light Duty Vehicles Heavy Duty Vehicles(optional) New Energy Vehicles& Battery Packs(optional) IMMO Diagnosis Add-on Kit(optional)	Passenger Cars Medium& Light Duty Vehicles Heavy Duty Vehicles(optional) New Energy Vehicles& Battery Packs(optional) IMMO Diagnosis Add-on Kit(optional)	Passenger Cars Medium& Light Duty Vehicles Heavy Duty Vehicles(optional) New Energy Vehicles& Battery Packs(optional) IMMO Diagnosis Add-on Kit(optional)
Service Functions
31*	√	√	√	√	√
FRM Reset	N/A	√	√	√	√
Gateway Module Data Calibration	N/A	N/A	N/A	√	√
ECU Reset	N/A	√	√	√	√
Rainfall Light Sensor	N/A	N/A	N/A	√	√
ODO Check	N/A	√	√	√	√
Resetmsvin	N/A	√	√	√	√
IMMO Program	N/A	√	√	√	√
Motor Angle Calibration	N/A	√	√	√	√
Clutching Matching	N/A	√	√	√	√
Turbocharging Matching	N/A	√	√	√	√

2.How to Use Launch X431 SmartLink C as J2534 VCI?
1)Install Driver
Go to https://en.cnlaunch.com/products-detail/i-227.html#pro_download.
Download "J2534 Tool and operation manual.rar".

Unzip file and you will get

Run "Launch J2534.exe" to install driver.

2)Update Driver
After installation, run "Launch J2534".

Connect SmartLink C to PC and vehicle.

Select "Update".

3)Select VCI
e.g. Techline SPS2
After we buy subscription, launch Techline Connect.

Here we select "Launch J2534".

Launch SmartLink C is connected.

SPS2 works well.
Done!