1. X-PROG 3 advanced immobilizer & key programmer is a powerful chip reading device that can read/write keys to the vehicle.
Launch X-PROG 3 Immobilizer & Key Programmer
2. Compatible with X-431 series diagnostic scanners, such as X431 PAD VII/ X431 V+/ X431 V 8inch/ X431 Pros.
3. Enables Anti-theft type identification, Remote control matching, Key chip reading & matching, anti-theft password reading and anti-theft component replacement.
Launch X-PROG 3 Features:
1. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables reading/writing EEPROM, on-board MCU and BMW CAS4+/FEM chips, Mercedes-Benz infrared keys, generating special keys, reading BMW engine ISN code.
2. Supported brands:
VW, AUDI, SKODA, SEAT, BMW, MERCEDES-BENZ, TOYOTA, etc. More models continue to be updated.
3. Supported systems:
Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc.
4. Compatible with:
X431 PAD VII/ X431 V+/ X431 V 8inch/ X431 Pros
5. Reads & writes most Engine/Gearbox ECUs without disassembling the shell
Update Notice: Launch X431 GIII X-Prog 3 latest update for VW MQB System (V10.80) Function:
1. Added the key learning and instrument replacement functions for Johnson MQB instruments (main control chips include A2C81589600, A2C81589700, D70F3526, and D70F3529)
2. Added the key learning, “All Keys Lost", and instrument replacement functions for Johnson anti-theft instruments as of 2014
3. Added the instrument cloning function for VDO35XXMQB instruments (main control chips include A2C81589600, A2C81589700, D70F3526 and D70F3529)
4. Added the functions "All Keys Lost" and instrument replacement for the fourth-generation 35XX instruments
Launch GIII X-Prog 3 Advantages:
1. Supports VW/AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).
2. Supports VW/AUDI MQB platform gearbox ECU replacement or cloning.
3. Supports ECU replacement for the fifth-generation of Audi (0AW/0B5) gearbox.
4. Supports reading, writing & cloning the ECU for the fourth-generation of VW UDS engine.
5. Supports BMW E chassis 8HP gearbox ECU reprogramming to empty.
6. Works with reprogramming device to backup/restore programming data (For Bosch/Siemens engine ECU).
Launch X-PROG 3 Functions:
1. EEPROM read and write
2. MCU read and write
3. Benz key
4. Key Simulator
5. Volkswagen's fourth-generation instrument disassembly and reading are all lost
6. BENCH mode read engine
7. Boot mode read engine
8. All Volkswagen 4th generation free accounts are lost
9. Reading gearbox data
10. Reading and writing of keys
11. BMW engine ISN code reading
12. BMW CAS4+, FEM chip read and write
13. Reading and writing of Audi's fifth-generation steering column chip
14. OBD reads MED17 engine
15. Volkswagen fourth-generation UDS engine replacement
16. Volkswagen MQB engine, gearbox, steering column lock replacement
17. Benz engine gearbox wipe empty function
LAUNCH X431 X prog 3 Compatible with (X-prog 3 can't work alone) :
X431 Diagun V , X431 PRO MINI , X431 PROS MINI, X431 V , X431 PRO3S+, X431 V+ , X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII
To check detail X-PROG3 Immobilizer key programming list, check list on the official website:
Supported Chip Brands:
It supports common mainstream ECU MCU manufacturers, with more than 1,000 product models, and they are continuously being updated.
Supported EEPROM Brands:
||Renesas V850 SPI
||Renesas V850 UART
It supports common mainstream EEPROM manufacturers, with nearly 1,000 product models, and they are continuously being updated.
XPROG3 Operation Connection:
Connection method 1:
Directly connect to OBD16 for key matching, data reading and writing, etc
Connection method 2:
Place the anti-theft EEPROM or MCU chip in the chip burning socket, and then insert the chip burning socket into the slot of the immobilizer programmer locker and lock it to realize the data interaction between the IC anti-theft chip and the diagnostic host
Connection method 3:
After removing the ECU from the car, connect the anti-theft ECU pin to the DIY slot of the immobilizer programmer through the cable to realize the data interaction between the anti-theft ECU and the diagnostic host.
Launch X-PROG 3 Update Guide:
1.On the main diagnostic screen, tap Software Update to enter the update center. Check the software you want to upgrade, and then tap Update.
2.Once downloading completes, the software packages will be installed automatically.
Launch X-PROG 3 Display:
Launch X431 X-PROG VS. X-PROG3
||Launch X431 X-PROG
||Launch X431 X-PROG3
|Mercedes Benz Keys
|VW 4th IMMO Dump Mode All Keys Lost
|Read engine in Bench mode
|VW 4th IMMO enumeration all keys lost
|Read gearbox data
|Read and write keys
|Read BMW engine ISN code
|Replace OBD reading component
|Read & Write BMW CAS4+ and FEM chips
|Read engine in Boot mode
|Read & Write Audi 5th generation steering column chips
Q1: If the X-PROG 3 can reset the ELV (electric steering column lock) on the Mercedes W169?
A1: Yes, it supported
Q2: Does Xprog3 support immo program
A2: Yes, it does
Q3: Whether X-431 PRO V7.0 can work with X-Prog 3?
A3: No, it can not, it need work with X431 V 8inch and above X431 Scanner.
- Main unit
- Power adaptor
- Main diagnostic cable
- The fourth-generation of EEPROM data acquisition cable(without dismantling dashboard)
- BENCH mode cable. MCu converter V1. MCU converter V2
- Mcu cable with multiple leads.EEPROM chip adaptor
- Benz infrared analog acquisition key
- MCU cable with multiple leadsEEPROM converter
- User Manual
2023 Buy Foxflash With Free Gifts Original Launch X-431 Best Seller, Up To 30% OffAny questions, please don't hesitate to contact us:Email: sales@CarDiagTool.co.ukSkype: cardiag.co.uk
Whatsapp: +86 15002705698Scan QR Code to Order By Mobile PhoneShipping Method & Delivery:UK/EU Warehouse Shipping:
3-5 working days. Fast Delivery No Tax.
EU Check: Ship from EU
UK Check: Ship from UKDHL Shipping:
5-7 working days, you need pay some tax to your customs. Usually we declare a lower price on DHL invoice to help with customs clearance. If your address belongs to remote area, customer will need to pay remote handling cost. Please remember to leave message if you have any special requirement.Yanwen Express:
10-15 working days. No Tax or remote cost for European Countries.Yodel/Royal Mail:
Just for United Kingdom. No Tax, and the delivery is about 7-10 days.Standard Post:
The delivery is about 15-20 days, no tax. Order under $150 normally with default shipping Standard Post, customers can tick for Express Shipping Service to ship by DHL.
Almost all item has one year warranty.
We also offer free fix to almost item we sold within one year, free repair. Man-made damage need pay.
We not offer warranty on keys,cables,adapter,online sent software ,please notice it.