Product Description
Launch X431 V+ is a typical diagnostic device contributed by Launch to diagnostic industry concerning Internet application. You can use X431 V+ to diagnose full car model and full system fault through Bluetoooth. X-PROG 3 is a powerful chip reading device that can read/write keys to the vehicle. Compatible with X-431 V+, X-PROG 3 enables Anti-theft type identification, Remote control matching, Key chip reading & matching, anti-theft password reading and anti-theft component replacement.
Original Launch X431 V+ 5.0 Full System Diagnostic Tool with Launch GIII X-PROG3 Immobilizer Programmer
Launch X431 V+ is a typical diagnostic device contributed by Launch to diagnostic industry concerning Internet application. You can use X431 V+ to diagnose full car model and full system fault through Bluetoooth. X-PROG 3 is a powerful chip reading device that can read/write keys to the vehicle. Compatible with X-431 V+, X-PROG 3 enables Anti-theft type identification, Remote control matching, Key chip reading & matching, anti-theft password reading and anti-theft component replacement.
Highlights:
1. Global Version, No IP Limitation
2. Package Contains Full Set Launch X431 V+ and Launch GIII X-PROG3
3. Vehicle Coverage: Supports about 80 car brands from USA, European, Asian and so on.
4. Supports More Advanced Functions, including Actuation Test and Guiding Functions (compatible with VW, AUDI, SKODA, SEAT).
5. Support Multi-Language: English, Italian, German, Japanese, Russian, French, Spanish, Portuguese, Polish, Dutch, Danish, Korean, Finnish, Swedish, etc
6. Supports VW/ AUDI MQB Platform Engine ECU Replacement or Cloning (Read engine ECU data directly from the key).
7. Works with Reprogramming Device to Backup/ Restore Programming Data (For Bosch/Siemens engine ECU).
8. Enables Reading/ Writing EEPROM, On-Board MCU and BMW CAS4+/ FEM Chips, Mercedes-Benz Infrared Keys, Generating Special Keys, Reading BMW Engine ISN Code.
9. Free Update Online for 2 Years
All System Diagnosis - Reads/Erase Trouble codes, data stream info. and more
LAUNCH X431 V+ can read DTCs and data streams for ALL systems to diagnose car comprehensively including Fuel system, Emission system, Transmission, Engine, Body, Powertrain and more, thus users don’t have to buy other tools for diagnosing systems for time & money saving.
All System Bidirectional Scan Tool: LAUNCH X431 V+(Bigger,Bidirectional,Better )
- With this diagnostic tool’s Active Test, you can output the command into the ECU in order to turn on/off actuators, to find faults in the subsystems of your car effortlessly, without using the vehicle’s control: Turn on the radiator fan | Modulate the throttle | Open/close windows | Operate mirrors | Turn on/off the lights | Turn on/off the sound horn | Test door l-ock … （Available test varies by the vehicle manufacturer, year, and model.）
Auto VIN & Scan
- Instead of entering the Vehicle VIN number manually, this professional diagnostic scanner comes with efficient Auto VIN Technology for retrieving vehicle information in just one touch, so the users are capable of quickly diagnostic all the ECUs on their vehicles and running a diagnosis on the selected systems.
37+ Mechanics Frequently USED Service Functions (21 special functions in Menu, many special function are done in car software, please note):
ECU CODING – The Coding function is used to re-flash the vehicle control modules, it allows you to reprogram adaptive data for certain components after making repairs or replacements.
OIL RESET – Reset the oil life systems every time the oil and oil filter are changed;
INJECTOR CODING– Code new injector numbers to replace the previous one when fitting the new injectors or after the replacement is completed;
BRAKE RESET – Deactivate and activate the brake control system, assist with brake fluid control, open and close brake pads, etc.;
SAS RESET – Perform steering angle sensor calibration and clear records;
BAT.RESET – Evaluate the battery charge state, monitor the closed-circuit current, register the battery replacement, etc.;
ABS BLEEDING– When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity;
ELEC.THROTTLE RLRN – Initialize the throttle actuators so that the “learned” values stored on ECU are returned to the default state;
TPMS RESET – Tire pressure resetting is required to be performed after maintenance is performed;
DPF REG – Clear PM (Particulate Matter) from the DPF filter through continuous combustion oxidation mode to stabilize the filter performance;
GEAR LEARN – Perform gear learning for the car when the engine ECU, the crankshaft position sensor, or the crankshaft flywheel is replaced;
KEY PROGRAMMING – Help ECU to recognize the new keys when you need to add new keys.
MORE ADVANCED FUNCTIONS ADDED: Windows Calibration + Seats Calibration + Tyre reset + Language Change + A/F Reset A/F + Coolant Bleed + Transport Mode + Adblue Reset + NOx Sensor Reset NOx + Stop/Start Reset + SCN Coding
(!!! only LAUNCH X431 V + has this function while V PRO does not)
GROWING FUNCTIONS:
Accompany with
continuous update of Launch X431 software and program,
More functions has been added : Head light Fitting, Seat Matching, Door and Window Initialization Study, Sunroof Initialization, Air Suspension Matching, Gearbox Matching, Injector Calibration, Multimedia Video Reset, Cluster Reset, Immobilizer Service, Tire Change Reset, (depending on the specific car models, not for all cars, ).
and more and more function will be improved and optimized.
ECU Coding and Active Test
This diagnostic tablet supports ECU coding function on a large amount of makes, including for Benz, for Ford and more. It also supports quick diagnosis via one-button VIN scanning. Active test is to test output elements. You can figure out whether a specific subsystem or component in your car functions well or not by using this tool to make the tester outputs function instead of checking in ignition status.
Remote Technical Support
By using this function, users can receive ad-hoc remote support from LAUNCH’s technical engineers, colleagues, or friends, by allowing them to control this tablet device on their PC via the TeamViewer software.
Extended Modules Create Double Achievement
NEW OPTIONAL FUNCTIONS: (Need Buy-Extra)
1)
Videoscope: Check unseen parts and give you a direct image of the engine, gears, compressors, headers and valves, and body components.
2)
X431 TSGUN: Active and relearn TPMS sensors; and program LAUNCH TPMS sensor.
3) X-431 ADAS Mobile/PRO: Operate ADAS calibration to vehicle cameras, LKA system, ACC system, LDW system, and AVM system.
4)
X431 X-PROG 3: Add, delete, and reprogram keys; rewrite smart keys; replace key ECU.
5) X431 WiFi Printer: Print diagnostic data or report for further analyzing and reviewing.
6)
BST360: Check the SOH of the on-board battery, functionality of discharge capacity and start-up capacity, etc. Provide a reliable analysis basis for the inspection and maintenance of car batteries.
7)
X431 Heavy Duty Module (diagnose gasoline vehicles & 24V Diesel Trucks)
Note: You can purchase these extended modules extra, if needed.
Launch X-PROG 3 Immobilizer & Key Programmer
Launch X-PROG 3 Features:
1. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables reading/writing EEPROM, on-board MCU and BMW CAS4+/FEM chips, Mercedes-Benz infrared keys, generating special keys, reading BMW engine ISN code.
2. Supported brands: VW, AUDI, SKODA, SEAT, BMW, MERCEDES-BENZ, TOYOTA, etc. More models continue to be updated.
3. Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc.
4. Compatible with: X431 PAD VII/ X431 V+/ X431 V 8inch/ X431 Pros
5. Reads & writes most Engine/Gearbox ECUs without disassembling the shell
Update Notice: Launch X431 GIII X-Prog 3 latest update for VW MQB System (V10.80) Function:
1. Added the key learning and instrument replacement functions for Johnson MQB instruments (main control chips include A2C81589600, A2C81589700, D70F3526, and D70F3529)
2. Added the key learning, “All Keys Lost", and instrument replacement functions for Johnson anti-theft instruments as of 2014
3. Added the instrument cloning function for VDO35XXMQB instruments (main control chips include A2C81589600, A2C81589700, D70F3526 and D70F3529)
4. Added the functions "All Keys Lost" and instrument replacement for the fourth-generation 35XX instruments
Launch GIII X-Prog 3 Advantages:
1. Supports VW/AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).
2. Supports VW/AUDI MQB platform gearbox ECU replacement or cloning.
3. Supports ECU replacement for the fifth-generation of Audi (0AW/0B5) gearbox.
4. Supports reading, writing & cloning the ECU for the fourth-generation of VW UDS engine.
5. Supports BMW E chassis 8HP gearbox ECU reprogramming to empty.
6. Works with reprogramming device to backup/restore programming data (For Bosch/Siemens engine ECU).
Launch X-PROG 3 Functions:
1. EEPROM read and write
2. MCU read and write
3. Benz key
4. Key Simulator
5. Volkswagen's fourth-generation instrument disassembly and reading are all lost
6. BENCH mode read engine
7. Boot mode read engine
8. All Volkswagen 4th generation free accounts are lost
9. Reading gearbox data
10. Reading and writing of keys
11. BMW engine ISN code reading
12. BMW CAS4+, FEM chip read and write
13. Reading and writing of Audi's fifth-generation steering column chip
14. OBD reads MED17 engine
15. Volkswagen fourth-generation UDS engine replacement
16. Volkswagen MQB engine, gearbox, steering column lock replacement
17. Benz engine gearbox wipe empty function
LAUNCH X431 X prog 3 Compatible with (X-prog 3 can't work alone) :
X431 Diagun V , X431 PRO MINI , X431 PROS MINI, X431 V , X431 PRO3S+, X431 V+ , X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII
To check detail X-PROG3 Immobilizer key programming list, check list on the official website:
https://qcar.x431.com/newqcar/carDes?lan=EN&swId=RESETPROG&page=1&type=3&serialName=Immo Program&area=RESET
Supported Chip Brands:
It supports common mainstream ECU MCU manufacturers, with more than 1,000 product models, and they are continuously being updated.
| Atmel |
NSC |
| Fujitsu |
Philips |
| Infineon |
Renesas M16 |
| MC68HC05 |
Renesas M32 |
| MC68HC08 |
Renesas M32R |
| MC68HC11 |
Renesas M32C |
| MC68HC12 |
Renesas R8C |
| MediaTek |
Renesas V850 SPI |
| MicroChip |
Renesas V850 UART |
| Nordic |
Samsung |
| ST |
SiLabs |
Supported EEPROM Brands:
It supports common mainstream EEPROM manufacturers, with nearly 1,000 product models, and they are continuously being updated.
| 4Wire |
GI |
Numonys |
SST |
| Adesto |
GigaDevice |
OKI |
ST |
| AKM |
Grundig |
ON Semi |
Toshiba |
| Altera |
HOLTEK |
Other |
Winbond |
| Amic |
Hynix |
PCT |
Xicor |
| Atmel |
I2C |
Philips |
xUSSR |
| BOSCH |
ITT |
Pioneer |
YMC |
| Catalyst |
KHIC |
PMC |
Spansion |
| Chings |
Macronix |
Ramtron |
SPI |
| Dallas/Maxim |
MicroChip |
Rohm |
NEC |
| EON |
Micron |
Samsung |
NSC |
| ESMT |
MicroWire |
Seiko |
Ford |
| EXEL |
Mitsubishi |
Siemens |
Fujitsu |
| Fairchild |
Motorola |
Sony |
|
XPROG3 Operation Connection:
Connection method 1: Directly connect to OBD16 for key matching, data reading and writing, etc
Connection method 2: Place the anti-theft EEPROM or MCU chip in the chip burning socket, and then insert the chip burning socket into the slot of the immobilizer programmer locker and lock it to realize the data interaction between the IC anti-theft chip and the diagnostic host
Connection method 3: After removing the ECU from the car, connect the anti-theft ECU pin to the DIY slot of the immobilizer programmer through the cable to realize the data interaction between the anti-theft ECU and the diagnostic host.
Package List:
1set x X431 V+
1set x Launch X-PROG3
Autel Hot Items, 100% Genuine, EU/UK Ship
Original Launch X-431 Best Seller, Up To 30% Off
Any questions, please don't hesitate to contact us:Email: sales@CarDiagTool.co.ukSkype: cardiag.co.ukWhatsapp:
+86 15002705698Scan QR Code to Order By Mobile Phone
Shipping Method & Delivery:UK/EU Warehouse Shipping: 3-5 working days. Fast Delivery No Tax.
EU Check:
Ship from EUUK Check:
Ship from UKDHL Shipping: 5-7 working days, you need pay some tax to your customs. Usually we declare a lower price on DHL invoice to help with customs clearance. If your address belongs to remote area, customer will need to pay remote handling cost. Please remember to leave message if you have any special requirement.
Yanwen Express: 10-15 working days. No Tax or remote cost for European Countries.
Yodel/Royal Mail: Just for United Kingdom. No Tax, and the delivery is about 7-10 days.
Standard Post: The delivery is about 15-20 days, no tax. Order under $150 normally with default shipping Standard Post, customers can tick for Express Shipping Service to ship by DHL.
Warranty Item:Almost all item has one year warranty.
We also offer free fix to almost item we sold within one year, free repair. Man-made damage need pay.
We not offer warranty on keys,cables,adapter,online sent software ,please notice it.
