Lonsdor K518ISE Key Programming User Manual

Lonsdor K518ISE can program BMW FEM BDC key by dismantling FEM module instead of OBD, but the BMW-FEM/BDC is updated for free, no more charge for the authorization or update, no more token...

 

Tap Immobilization->BMW->category by system->FEM/BDC

Function overview:
 

1- read key information: read out key data and prompt that if the immobilizer system needs pre-processing

2- Pre-process FEM/BD system: backup original coding data, read out EEPROM, generate service mode EEPROM data, program, restore the original EEPROM data, restore coding codes (for the details, please read the operation guide)

3- Generate dealer key: program a new key as a dealer key

4- enable key: set a "disabled" key to "enabled"

5- disable key: set a "enabled" or a "lost”key as "disabled"

6- delete key: delete keys that are unnecessary or lost

 

 

Steps: read key info->Pre-process FEM/BD system->Generate dealer key

 

 

Before operating other functions, you must read key info firstly.

 

 

1: OBD backup the original coding data:

 

Connect the FEM/BDC system on the car or the test platform, then backup the original coding files via OBD.

 

2: read out EEPROM backup data & generate service mode EEPROM:

 

    Remove the FEM/BDC module, find out chip 95128 or 95256, read EEPROM data using an ECU programmer e.g VVDI-Prog, Orange5 etc.;

    Import the EEPROM data into the customfile folder of Lonsdor K518ISE;

    Enter the program, read original EEPROM data and generate service mode EEPROM, export the service mode EEPROM data, write it into the chip 95128 / 95256 with the ECU programmer.

    Restore FEM/BDC system, supply power to the car and connect via OBD

 

3: programming

    This procedure requires to be done on the BMW FEM/BDC test platform, meawhile you have to ensure that Step 1 & 2 is finished.

    Supply power to the FEM/BDC system and connect it to the OBD port.

 

4: restore EEPROM data

    Remove FEM/BDC module, write the original EEPROM data (Step 2) into chip 95128/95256

    Restore FEM/BDC system, supply power and connect to OBD

 

5: restore coding data

Load the coding files that are backed up in step 1, restore coding information via OBD

 

6: pre-processing is done.

 

 

1: Lonsdor K518ISE Programmer reads out data, select the key position to be generated.

2: Choose "by original car key" to make a dealer key, for all key lost: enter 32-bit ISN code

3: Put the original key near the car immo induction loop

 

4: Detecting the original key, read out immo data

5: Put a new key near the car immo induction loop (see the above picture)

6: Detect the key key, learn new key (don't move the key, keep stable)

7: key learn complete.

 

 

1: Lonsdor K518ISE read out data, select the key ID position to disable

2: Put a working key near the car induction loop

3: K518ISE system tries to connect to CAS, disable the key in the current ID position, disable key with success.

 

 

1: Lonsdor K518ISE read out data, select the key ID position to enable

2: put a “used” key near the car induction loop

3: K518ISE system tries to connect to CAS, enable the key with current ID position, enable key successfully

 

 

1: K518ISE read out data, select the key ID position to delete

2: read FEM/BDC key pin code

3: delete the key successfully; the key position is blank

 

 

1: Please remember to read key info before you want to operate any function.

 

2: 5 tips on pre-process FEM/BDC (all the dismantle operations need to power off)

 

1) via OBD to backup original code

2) Dismantle & read car EEPROM and import to K518ISE customfile.

3) Generate and write the service mode EEPROM data to FEM, re-install to program

4) Dismantle FEM and write back original EEPROM data, reinstall to restore EEPROM.

5) ECU programming: need 6 min, with power supply connected

6) disconnect to the power supply, disassemble CPU, write the original EEPROM data into the chip, install CPU on the car, connect to the power supply, make sure communicate is successful

7) upload coding files (Step 1), restore original coding info to pre-process, then make a dealer key

 

Done!

 

2009 Ford Focus 

2011 Ford F150

2011 Jeep Liberty via compass

2015 Dodge Caravan

2014 Dodge Journey 

2004 VW Jetta

2005 Honda Civic

2015 Ford Focus

2017 Honda Civic push start

2017 Mazda 3 prox no code needed 

2017 Ford C-max via focus

2012 Ford Focus by pass

13 Honda Accord remote head key

2013 Mazda 6 prox under new M6

10 Nissan Altima Puss to start 

2014 Nissan Rogue new 20 digit 

2004 Cadillac CTS

2016 Honda Odyssey - prox

2007 Peugeot 307

2008 Subaru Outback AKL

2009 Toyota Camry

06 BMW 5-series cas2

2008 Chrysler 300

2007 Renault megane2

2016 Dodge Caravan

06 F150

2012 Mazda 3 Prox

2009 Chrysler 300

2012 Ford F-250-

2014 Ford Fiesta No 10 min wait!

2014 Chrysler Town & Country

2013 Honda Civic 

2010 Jeep Patriot 

2013 Ford F150

10 Ford Mustang under Kuga by pass

2010 Chevy silvera do 

2008 Lexus IS250 (Under IS300)

2013 Mazda 3

2008 Jeep Grand Cherokee

2006 Subaru Forester remote

2012 Nissan Sentra

2010 GMC Acadia key and remote

2010 Mountaineer

2015 Kia Optima remote

14 Chevy camaro rea pin number type5

2007 Ford Taurus under explorer 2007

2016 Ford F150 Prox

2017 nv200

2003 Mitsubishi eclipse

2006 Chrysler 300

2016 Honda Civic turn key

2013 Nissan Rogue

2016 Ford Taurus prox

2013 Dodge Caravan

208 Toyota Camry

2016 Hyundai Elantra 

2010 Mercury Mountaineer

2012 Nissan Versa

2008 Honda CR-V

2016 Nissan Rogue 

2010 Chevy Malibu 

Test in vw amarok, program key done, kms done !

mini cas3 done, all key lost bmw 540 cas2 japon model done. volvo xc60 done 

reset G immobox done, immobox vw read pincode ok but no program key ​​​​​​

2005 Renault Scenic 3 button card key. Key was coded within 1 minute without the need to enter a pin code.

2007 Suburu Impreza. ID62 chip coded using System 1

2007 Nissan Qashqai. took me 5 minutes to code remote key. Would have taken less if I didn't have to go through the different systems before device communicated properly. The pin was automatically generated and entered buy device. see photo

All European Cars

---

Lonsdor K518ISE FAQ:

Q: Somebody tested Volvo key programming? Interested fact is te calculation data has 'it's term of validty'. I mean if we calculate data from CEM Lonsdor accept calculated file but if we try it next day, then device say wrong file and we need to calculate one more time. I havent chance to test on real car yet, now just plyaing with CEM units. But I wonder how they calculate those datas and why they expire                       
A: If you use other key programmer to read out the data, then K518 need to transfer, and it will have 'it's term of validty'. If you directly use K518 + KPROG to read out and automatically save into K518, then it won't have the validty. 
 

 

Q: Will it read pin code on US sold hyundai and kia smart system?

A: K518ISE can work on hyundai and kia smart system with 47, 8A chip, for 46 chip, you have to collect the copy password firstly then to calculate the pin code.

 

Q: Can K518ISE support 2017 Ford Escape smart key?

A: It works on 49 chip of 2017 Ford Escape smart key.

 

Q: If Lonsdor K518ISE can Support 2017 CAMRY WITH  DST 128 All key lost?

A: It can't support now

Customer Feedback:

Newest Feedbacks:
For Audi a3 MQB limousine year 2015 make dealer key and add key "OK".Menu: for V-W>Immo4>MQB-35xx(mainland/ vdo)
I tried first with vvdi2 it fails.. so i tried with lonsdor, without any peroblem !
For Mitsubishi space wagon 2003, precoded id61 and programmed key ok.
For Corsa E (2016) read PIN (BCM) = OK
For V-W Amarok 2016 add key ok and backup eeprom

For FIAT 500 2008 Read Pin code and preapre remtote key than program. ALL FINE
I have start loving this toy when i bought it was working 20% ok 80% not Now it is 95 - 5. Today for megane 3 year 2009 keyless key made job in 2minutes
For Porche Panamera 2010 km adjust obd job done
for hyunday i20 2015 year
read pin ok
add key ok
for Citroën c5 2008 read pin add key ok
for 307 Kline read pin fail / add key ok
206 kline all key lost read pin ok about 3sec
for opel Zafira b read pin add key
for Touran 2006 learn key and remote ok
for Zafira B, read pin and add key, - Success (note, this failed under for Zafira B in menu, but i chose type 3 from by system for both pin read and program and works fine)

for Peugeot 607 2006 abrites won't connect with BSI to read pin and key learning too.
Lonsdor read pin and program key 2 min .
for Renault Fluence 2015 keyless go works excelent,in fact,zed full asks for pin and Lonsdor doesn't.The key works ok in central module and keyless go,5 min job.
for Suzuki Swift 2015-> (pcf7961)
all key lost
Program without pin - OK (2min)
For ford f-o-c-u-s 2006 year
add key (all key lost) work all ok
============================================

13 for Jaguar XJ: smart key programing in 2 mins
'14 for Jaguar XK: chanceless (only Abritas knows this car today)
'13 for Megane III Ph2: no pin reading, asks for pin to be able to do programming.
'11 for Clio III Ph2 Grand Tour: Nothing. No communication.
2 pcs for Astra H: No pin; 4 pcs Astra G: No pin; and a Corsa C: no pin.
'17 for Mustang Shelby GT350: It was harder to get out the rubber pad from the cup holder, than the programing itself. Smart key added in 1 min.
'04 for Clio II Ph2 30 sec without pin
'10 for Megane III Ph1 RS under one minute with hands free cards
'08 for Dodge RAM 1500: it toke 5 mins to catch that it has to be programed as it were younger than 2012. With that setting under a minute with pin extraction.
'07 E60 for Beemer: The customer had a chinese folding key with 315 MHz and he paid for just the trying - we told him that it won't work - the only thing was that we had to re-activate the original keys. I think it can be done when you use the factory diamond 868 MHz keys.
'13 for Dodge Charger smart key OK
'15 for Ford Edge remote key OK, under 2 mins.
'04 & '06 for Megane II: under a minute, normal cards
'15 for Dodge Challenger: under 2 mins OK
e90 2007 868Mhz Europe by obd ok
for ssangyong korando 2011 diesel all keys lost : programming key with chip 4D - OK

for Peugeot 508 2013 pin extraction & programing 0k
for Toyota corolla 2010 all key lost "G" succses
for Toyota rav4 2006 proxy ok, for auris 2015 remote ok, for bmw x5 2008 cas3 ok,
for Peugeot RCZ 2016 pin OK programme key ok
for Megane 2 2007 key card succesfully done. 10 seconds done
read pincode tipe2 P-S-A done, bsi J.C
read pincode tipe 1 P-S-A done, bsi VALEO CAN

for Peugeot 208 2011 : pin ok programme seconde key ok
for Chevrolet captiva 2012 : programme remote ok
for BMW X6 2008 cas3 868 mhz succsess by OBD 2 min
for Toyota hilux 2018 H add key ok
for Nissan murano 2007 old pincode program ok
for skoda rapid 2013 24c64 add key - ok. odo -ok
for ford focus 2 2007 odo - ok
for Astra H 2005 all key lost ok
Pin reader comminication error
counted the pin from the dashboard
for Prado 2014 (euro) All key lost G-chip 2 min done. Programmed remote Ok

for corolla 2008 all key lost ==>> very good
2012 for V-W T5 Kombi immo4 NEC24C64 tp23 chip job well done in 5 minutes, all keys lost. You press eeprom back up, then go to make dealer key, place tp23 chip in the machine slot and then learn key. Done! Actually, this car need to put in service mode wrrite eprom back and then add key, with the above procedure u can make only car with can with valid key
for BMW f11 2015, keys done (have working key)
for BMW f25 fem, keys done (have working key)
for Hyundai I10 2012 Europe pin read OK! Key Added OK!!!!!! NO BAD....
 

the tool won't extract pin via obd so i use other service for pin code

and than use tool to program key 2min and all is ok

Lonsdor K518ISE Latest Key Programming Upgrade Information

We are so happy to share the latest upgrade news about Lonsdor K518ISE Latest Key Programming Upgrade Information, adding new functions for car brands like TOYOTA/LEXUS/NISSAN, etc.

 

Latest Upgrade One. Lonsdor latest 8A universal smart key is coming!!!

* Stable Functions & Superior Quality

* Long distance remote control!

* Multiple board numbers

* Support many new car models

* Free & Easy generation by K518/KH100 series

 

Current Board numbers:

0020  2110  0410  2020

0010  0101  3330 0351 3950 ...

 

Support frequencies:

312.09/314.35  314.35/312.09

314.35/315.10  315.10/314.35

433.58/434.42  434.42/433.58

312.50/314.00  314.00/315.10

312.50/314.00   433.92...

 

Support models:

TOYOTA

Camry(2015-2021)  Levin(2015-2018)  Corolla(2015-2019)  C-HR (2019-)  Alphard(2015-2021)  RAV4(2015-2021)  Land Cruiser(2016-2021)   IZOA(2019-2021)

Wildlander(2021-)  Highlander(2015-2021, PIN required for 2021)

 

LEXUS(2014-2021)

NX series  ES series  GS series  RX series  LS series  UX series

 

Notes:

For some new models, require to calculate PIN so as to add 8A smart key; or use H0410C/H0440C to collect data to generate 8A key directly(free of PIN), support models: RAV4(2020-), Avalon(2020-), Wildlander(2020-), Lexus ES UX GS NX RX LS(2020-).

 

Menu path

For K518: Special functions--> Key settings--> FT smart key--> 8A--> Convert smart key type

For KH100: Special Function--> FT smart key--> 8A type-->Convert smart key type

Latest Upgrade Two. Lonsdor Nissan 22-digit PIN code Calculator is coming！
Support Nissan X-Trail 2018- with chassis number: P15
Red-type: includes 20-times calculation(Much more cost-effective!)