April Big Sale EU Ship No Tax 2024 SUPER MB PRO M6+ Diagnosis Tool Full Configuration Benz Diagnostic Tool Supports BMW Aicoder, E-sys

SUPER MB PRO M6+ Diagnosis Tool Full Package
 

Based on M6, Super MB PRO M6+ has greatly improved product functions and compatibility, and is 100% compatible with the original Mercedes-Benz software.
 

Full configuration= MB Star full function+ BMW F+G series coding+ Other DoIP
 

1. Perfectly replaces normal MB SD C4 Plus Doip, EU Ship No Tax
 

 

3. The front label of the M6+ uses a design with trademark rights and art copyrights to improve product recognition.

 

4. The communication interface between the M6+ and the computer is a USB3.0 interface, which improves the compatibility of the product with computers and tablets. (Compatible with both old and new computers and tablets, no need to choose old-fashioned computers and tablets with network ports.)

 

5. M6+ supports remote C-side operation. The client does not need to install special diagnostic testing software. Just connect the M6+ to a local computer that can access the Internet, and we can remotely provide customers with paid diagnosis and detection services of vehicle failure. Customers can also set up a local remote diagnostic test in the local area network. The above ways greatly improve the product flexibility.

 

 

7. M6+ supports BMW APP software, provides mobile phone English version of Bimmercode (coding hidden functions activation) Bimmerlink (diagnostics codes clearing) and other mobile phone software, supports MHD .Bimmergeeks .. XHP Flashtool. ODIS-e.XDelete.THOR-the M Flasher.PRO- Tool and other mobile apps.

 

8. M6+ supports vehicles with DOIP communication protocol, such as the new Volkswagen, Audi, Skoda, Bentley, Lambo, etc. A dedicated transition button is provided.

9. SUPER MB PRO M6 is the only diagnostic tool on the market that is highly consistent with the original MB Star C6:

1) Fully compatible with the original software.
2) You can directly upgrade the newest firmware without installing additional driver.

10. Can perform the same functions as that of the original:

Compatible with the Mercedes Benz models with protocol DOIP, K-line, CAN Low, Can High, LIN, RS485, etc, work with the old cars and new cars.

11. Support diverse Mercedes-Benz models, covering 12v car, 24v diesel truck & bus, MPV etc.

12. Support new models such as W223 c206 213 167

13. Support firmware update without installing the battery, but directly plug the device to the OBD port of the car to supply power, you do not need to worry about that the firmware will be damaged in the process of update.

Kindly Note:

1) This link is without Xentry Software, if you need software together, please order MB StarDiagnosis Xentry Software HDD/SSD separately.

2) This kit supports to work with original Xentry Software.

3) about WIFI set : Unplug the USB cable, wifi name: M6+ DOIP-**** , when connected, the wireless indicator green light is always on, the wired light is off, no setting is required, the WIFI password is 123456789.

SUPER MB PRO M6+ Functions:

 

 

	SD C4 Plus	Super MB PRO M6	Super MB PRO M6+	OEM BENZ C6
Image
Update	HDD/SSD	HDD/SSD	HDD/SSD	HDD/SSD
OEM Compatibility	√	√	√	√
Programming	√	√	√	√
Diagnosis	√	√	√	√
XENTRY	√	√	√	√
XENTRY Truck	√	√	√	√
DTS	√	√	√	√
Vediamo	√	√	√	×
MB DOIP	√	√	√	√
MB WIFI	√	√	√	√
PC USB	√	×	√	√
PC RJ45	√	√	×	√
BWM Aicoder	×	×	√	×
BWM E-SYS	×	×	√	×
BWM APP	×	×	√	×
Other DOIP	×	×	√	×
Cooling	Heat Sinks	Heat Sinks+Fans	Heat Sinks+Fans	×
Old Mercedes	√	√	√	×
New Mercedes	√	√	√	√

Passenger Car Support List:

A(176),  A(169),  A(168),  B(246),  B(245),  CLC(117),  C(204)  C(203),  C(202),  190(201),  E(212),  E(211),  E(210),  124(124),  S(222),  S(221),  S(220),  S(140),  S(126),  
E(207),  CLK(209),  CLK(208),  CLS(218),  CLS(219),  CL(216),  CL(215),  CL(140)  SLK(172),  SLK(171),  SLK(170),  SL(231),  SL(230),  SL(129),  SL(107),  SLS(197),  
M(166),  M(164),  M(163),  G(463),  G(461),  E(212),  E(211),  E(210),  124(124),  S(222),  S(221),S(220),  S(140),  CLK(209),  CLK(208),  CLS(218),  CLS(219),  CL(216),  
CL(215),  CL(140),  SLK(172),  SL(231),  SL(230),  SL(129),  SL(107),SLS(197),  M(166),  M(164),  M(163),  G(460),  GL(164),  GLK(204),  R(251)

Van Support List: 

MB 100(631),  T1,  SprinterIII,  SprinterII,  SprinterI,  Sprinter900,  Citan,  Vito(639),  Vito(638), V(638),   Viano(639),  T2,  Vario,  Vaneo(414)

Truck Support List:

Actros963/4,  Actros2,3,  AtegoIII,  AtegoII,  AxorII,  Eonic,  Zetros,  Actros,  Atego Light,  Atego Heavey,  HPN M96,  Atron,  HPN M2000,  SKL,  FSK,  Further model series

Unimog Support List:

U20,  UGN,  UHN

Bus Support List:

TRAVEGO,  INTOURO,  INTEGRO,  CITARO,  CAPACITY,  CITO,  TOURISMO,  O350/O403, CONECTO,  O404,  O405-O408,  
Minibus,  OC500,  TOURO,  TOURINO,  MBC,  MULITEGO,  O500,  O500/OH,  OH,  OH368,  OF,  OF384,  LO,  O400, FURTHER MODEL SERIES

Super Sports Car Support List:

SLR(199)

 

 

1. Connection between MB diagnostic software and hardware

 

(1)Connect the M6+ hardware box to the car diagnostic interface via the test line. The red indicator light ① on the host is always on, and the system indicator ② is flashing during startup. After startup, ② is always on and beeps once, indicating the startup is finished.

(2)Wired connection: Connect the USB port ⑦ of the M6+ hardware box to the USB port of the computer or tablet via a USB cable, and a new network connection will appear on the network management interface of the computer or tablet (WIN10 driver-free), and the IP address of the network connection property will be changed to 169.254.255.*, Subnet mask: 255.255.0.0, Preferred DNS: 169.254.255.255, click “Advanced”, add multiple IP addresses as 172.29.127.*, 255.255.0.0. After the computer or tablet is connected to the network, ④ the indicator light will be on.

(3) Wireless connection: You cannot find the wireless network by plugging in the USB cable. Unplug the USB cable from the M6+ hardware box port, and you will find a M6+ DOIP-**** network on the computer or tablet, just connect it. ⑤ The green light of the wireless indicator is always on, the wired light is off, no setting is required, the password is 123456789.

(4) After opening the BEN software lock on the computer side, the original diagnostic test software can be used normally.

(5) For remote C-end operation, please consult us.

 

 

(1)Connect the M6+ hardware box to the car diagnostic interface via the test line. The red indicator light ① on the host is always on, and the system indicator ② is flashing during startup. After startup, it is always on and beeps once, indicating the startup is finished.

(2)Wired connection: Connect the USB port of the M6+ hardware box to the USB port of the computer or tablet via a USB cable, and a new network connection will appear on the network management interface of the computer or tablet (WIN10 driver-free), and change the network connection attribute IP address to 172.29.127.* 255.255.255.0. Click “Advanced” and add a multi-IP address as 169.254.0.* 255.255.255.0. After the computer or tablet is connected to the network, the indicator light ④ will be always on. Press and hold the switch button ⑥ on the side for 3 seconds and then release it. You can see that the ④ green indicator light is always on and then flashing, indicating that the test can be performed normally. It will return to the initial state after it is powered on again.

(3)The wireless network can NOT be found by plugging in the USB cable. Unplug the USB cable from the M6+ hardware box port, and you will find a M6+ DOIP-**** network on the computer or tablet. You can connect without any settings, and the password is 123456789, ⑤The wireless indicator green light is always on, ④The wired indicator is off. Press and hold the ⑥ switch button on the side for 3 seconds and release it, you can see ⑤the wireless green indicator light is always on and turns to flashing, indicating that the test can be performed normally. It will return to the initial state after it is powered on again.

(4) The computer-side BWM software adopts wired or wireless connection, and the mobile phone BMW APP software adopts wireless connection.

(5) For remote C-end operation, please consult us.

3. For DOIP function and hardware connection of other diagnostic test software, please refer to BMW software and hardware connection method

Super MB Pro M6+ PCB Pictures Display:



Display:


Package Includes: