How to Read PSA DCM6.2A Flash by KT200, OBD or Boot?

---

Question:
KT200 can read ECU PSA DCM6.2A in bank? Or can only do it in OBD


Answer:
On Bench/ OBD on Bench/ Jtag BDM.

Method 1.On Bench

PIN2&3&52 - +12V
PIN4&5 - GND
PIN33 - CANL
PIN49 - CANH

Method 2.OBD on Bench
*This may only read ID but not full flash file because IMMO/ gateway not present blocks read/write instruction, so will only work in vehicle not on bench OBD



Also with VAG UDS via OBD, ECU must get immo clearance to enable write

Method 3.JTAG/ BDM

Solder 2 links on backside.

On front side solder the rainbow flat cable.