ICOM A2+B+C Diagnostic & Programming Tool with Wifi
Buy it for 5 reasons:
1. Software Version: 2016.03
Firmware Version:?ICOM Application-01.40.05 ICOM Boot-01.23.01
2. Support WIFI,wireless connection.Supports for a new Intel adapter function.
3. Supports almost 95% laptop on the world with Intel chip( I3/I5/I7 series) and have 4GB memory.
4. Multi-Language:English, German, Russian,Korean.
5. Support bmw diagnose and programming, also TIS diagram circuit.
No Network And Also No Connection With The Original Server When You Use The BMW ICOM Software HDD.
Otherwise It Is Will Be Damaged,And Need You Send Back For Repair
BMW ICOM Function:
1. A2- OBD diagnostic supporting MOST, D-CAN and K-CAN protocols
2. B - diagnostic via MOST bus, and have connection to A-interface via USB connection.
3. C - 20-pin cable for old models.
How to install on WIN8 system:
1. Insert D-LINK
2. Start your computer
3. Double click "ISPI-NEXT Admin Tools" shortcuts on your desktop, wait about 20 seconds until the software startup.
4. Select "Wifi For ICOM", wait about 5 seconds until it ticks.?
5. At this time, you can check Wifi connection in your phone, you will find Wifi name "ISAP" after D-LINK successfully startup.
6. Connect ICOM to vehicle.
7. After ICOM SYSTEM light stop flashing, WLAN light will flash for several seconds then keep on, it means ICOM is successfully connected to the computer.?
BMW ICOM A2 Compared with ICOM:
1. The modified ICOM A2 for vehicles with OBD access receives a significantly more powerful processor and more storage capacity.
2. Robust aluminium case will help to avoid damage when using in harsh environments.
3. To protect the MOST connector, the ICOM B for vehicles with optical MOST access will be equipped with a soft cover made of rubber instead of the former plastic cap.
4. The ICOM C for old series with a diagnostics socket will be additionally equipped with an approx. 20 cm long cable, which facilitates the connection of the ICOM A2 and makes storage in the engine compartment easier.
5. BMW ICOM A2+B+C support BMW cars till 2013 year. Support BMW & MINI full system diagnose and offline programming.
1. Dual-core processor, it is recommended that the I3 above.
2. More than 4G of memory.
3. we recommend you choose Lenovo ThinkPad X200, X230, X230T, X61T, T410, X61,Dell D630, E49.
4. This package do not contain software, you can choose software hard disk from our shop.
How to set bmw icom WIFI usb?
First,we advise you connect bmw icom with your unit by cables,wifi is not stable.
1 Connect icom usb wifi with computer usb port.
2 Close the computer built-in wifi,only left our usb wifi,cannot connect internet with lan cable in same time.
3 Make sure there is no internet connection except our usb wifi,then you can start your computer now.
4 Our wifi usb name is DWA-131
5 Open the bmw icom software,choose wifi for icom
6 Connect car with icom a2 unit ,wait about one min,you will see the wlan lights on the main unit turn?
off or Flash very slowly,that means the usb wifi is good connection with icom wifi.
7 You can press "diagnose“ or "program" now,press ok
8 Cannot close this page,just minimize it.
9 OK now
1. 1pc x BMW ICOM A2 Interface
2. 1pc x BMW ICOM B Most
3. 1pc x BMW 20pin Cable
4. 1pc x USB Cable
5. 1pc x OBD2 Cable
6. 1pc x LAN Cable ?
7. 1pc x?D-link USB WIFI adapter
8. 1pc x software HDD
A: Yes, it can do.?
Q: May I connect it to original BMW sever? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
A: No, please pay much attention: make sure disconnect network and do not connect it to original Server, otherwise it will be damaged and fianlly you have to send it back to us for repair, it is not cost-effective. ?
Q: I get the V2014.12 BMW ICOM A2 interface and HDD,but get this error"database version mismach, the found database version are not compatible", could you help? ? ? ? ? ? ? ? ? ?
A: Please set the ISTA/D language as Amercian English.?