V5.50 XPROG M X-PROG Box ECU Programmer with BMW CAS4 5M48H function, supports more than 450 units (serial EEPROM's, MCU, ECU, DashBoards, Immobilizers, Calculators and others).
K-TAG ECU Programming Tool is designed entirely around the needs of our customers to be more responsive and reliable. A true champion of innovation, K-TAG introduces another brand new novelty to Alientech world: J-Tag communication for Asian vehicles.
Orange 5 is a professional programming device for memory and microcontrollers. Unique feature of the current series programmers is built-in macro language for writing down protocols, which gives fast and easy capability to add new types of micro schemes, precisely meeting manufacturers' requirements to read/write algorithms.
CMD CAN Flasher V1251 read and write flash memory via the diagnostic connector on the CAN line of computers with motor MED9.1, MED9.5, EDC16U3x/CP, EDC16CP31, EDC16CP36, EDC16C3 and EDC16C9 fuel injection. Working through CAN, not on K line.
Kess V5.017 online version is perfect for OBD2 use, Ktag V7.020 is perfect for Jtag, BDM and Boot application(tricore and ST10), Kess 5.017 +ktag V7.020 allow you read and write ECU from OBD2 port and program with Jtag, BDM and Boot protocols
NEC Programmer is a ECU Dash Programmer or ECU Flasher designed for Vehicles using the NEC MCU such as Citroen,Peugeot,Hyundai,Honda,Suzuki,Renault,Opel,Alfa,Chevrolet (please refer to the Applicable Models below) that allows you to modify/reprogram your car's computer or correct the odometer reading!
XPROG-M V5.55 XPROG M Programmer for BMW CAS4.
1. Without operation system limitation.
2. Software can be installed on Windows XP/ 7.
3. Add new authorization: AUTH-0025 Authorized 11/4/2014.
No PCB in this package! LED works for 12V. After you connect with the probe, disconnect 12V battery for LED,it will works.The probe pin is adjustable.
CardiagTool.co.uk supply you cheapest MPPS V13.02 Chip Tuning tool.Supports the latest drivers EDC16, EDC17, MED9.x, Siemens PPD1 / x, EDC15, ME7.xi much more ... Professional performance, without unnecessary boxes and cables. All electronics in OBD2 connector.
ArtiPad I is an evolutionary smart solution for car diagnoses based on the multitask-capable Android operating system.This diagnostic tool delivers quick and complete diagnoses to solve problems more efficiently, significantly decrease downtime and increase revenue.
Read the chip data, read and write ECU data, read gearbox data etc at a high speed.
Bmw Carsoft 6.5 is a diagnostic tool for Bmw series which is compatible with the original interface, and is fully digital line switching and MCU controlled service reset timing. Special functions for some models: Including service interval reset, component activation, live data, LCM reading, sync.EWS and ECU, adaptation values, and coding.
KTAG KESS KTM Dimsport BDM probe adapters full set Denso, Marelli, Bosch, Siemens
KESS V2.37 Truck & Master Version Firmware V4.024 support more trucks model than any version. Kess v2 Truck Version provide two software version, can be used with internet, can not use internet. Compared with other version, firmware V4.024 is more stable.
Latest Version X-PROG Box ECU Programmer XPROG-M V5.84 with USB Dongle,no need to activate,add new authorization: AUTH-0028-1 Renesas V850 Authorized and AUTH-0028-2 Renesas SuperH Authorized 2017/10/9
XPROG-M ECU Programmer, XPROG-M V5.5.5 is the only tool can decryption BMW CAS4. The package come with T420 laptop, Hard disk. Software is preinstalled, you can directly use when you receive the package.
Vediamo 4.2 + PIC12F509 for MB Multiplexer C3 allows diagnostics on any ECU over K-line as well as CAN, and encompasses all established protocols from RTMD+, MBISO, KWFB, KW2000 to UDS. Despite its name, Vediamo is no longer limited only to engine ECUs.You can add this chips to let your c3 become Engineer version.