1. Start the engine.
2. Locate the “TPMS RESET” button at the end of the handle and press until you are prompted to reset the tire pressure information.
3. Drive at a speed of no less than 30Km/h (20mph) to ensure that the vehicle enters the new ID recognition mode of the tire pressure sensor. (Try not to stop in the middle.)
4. To ensure that the new tire pressure sensor is correctly identified, at least 20 minutes of driving is required.
BMW Self-learning tire pressure sensor
BMW Self-learning tire pressure sensor is a TPMS sensor that does not require device to activate. Please install it on the car and follow the self-learning steps to complete matching and activation. It can monitor the current tire pressure and temperature. It provides safety guarantee for the driver.
When to use BMW Self-learning tire pressure sensor?
The original tire pressure sensor is damaged / doesn't work/ cannot be matched and activated again / the battery is low and the display value is incorrect
Top 6 reasons to install BMW Self-learning tire pressure sensor:
1. Foresee air leakage: When air leakage reaches a dangerous level, the tpms system will issue an alarm.
2. Prevent tire blowouts: Real-time monitoring of tire pressure and temperature, when abnormal tpms occurs, the system will alert you.
3. Prevent tire bulge. Tire pressure overheating and high pressure may cause tire cord breaking and rubber aging.
4. tpms sensor can monitor the current tire pressure and temperature in real time for 24 hours.
5. Standard tire pressure and temperature can extend the life of the tire.
6. Provide safety guarantee for users to trip.
Five advantages of BMW self-learning tire pressure sensor:
1. No need professional tools to match and activate the TPMS.
2. Easy to install
3. Dustproof, waterproof, cold resistance and aging resistance, support tires running at high speed, high air tightness.
4. Support high-speed self-learning
5. You only need to replace the broken tire sensors, not all four tires before matching and activation. It is compatible with the original tpms sensor without causing the tpms system to work abnormally.
Workable BMW models and Year:
How to install BMW Self-learning tire pressure sensor?
1. Dismantle the tire.
1. Take off the tpms sensor of the original car
2. Install BMW Self-learning tire pressure sensor
3. Inflate the tires and install it on the car, prepare for self-learning.
Self-learning steps:
1. Start the engine.
2. Locate the “TPMS RESET” button at the end of the handle and press until you are prompted to reset the tire pressure information.
3. Drive at a speed of no less than 30Km/h (20mph) to ensure that the vehicle enters the new ID recognition mode of the tire pressure sensor. (Try not to stop in the middle.)
4. To ensure that the new tire pressure sensor is correctly identified, at least 20 minutes of driving is required.
1. Enter "My Vehicle".
2. Select "Vehicle Status".
3. Select "Perform reset".
4. It will self-learning when driving.
5. Reset Successfully.
Five points to note:
1. The driving speed cannot be lower than 30Km/h (20mph)
2. Need to drive the car to the relatively unobstructed road section (about 20km, with fewer traffic lights and few stops, which can improve the success rate of self-learning, usually it will take 6-20 minutes. Too many stops on the road will lead to learning failure, and then drive the car on the unobstructed road section to relearn.)
3. The inflation pressure cannot be too high or too low. Must comply with the tire pressure set by the vehicle tpms.
4. It covers the year when the car was manufactured, not the year when the customer bought the car.
5. It is suitable for users who installed tpms sensor in the car, and need to replace the broken tpms sensor.
Reasons for learning failure:
1. The speed is lower than 30Km/h (20mph) [solution: please control the speed]
2. During the driving, there are too many pauses [Solution: drive to the road in good conditions to re-learn.]
3. In addition to the tpms sensor of the original car, a third-party tpms sensor is installed [remove the third-party tpms sensor]
4. The tire pressure does not meet the calibration value of the car [Adjust tire pressure]
5. Doesn't support the year model [Please use it on a supported vehicle]