How to Use Autel BT506 Battery Tester?
Matched product:
Latest price:€179.00$189.74£155.53AUD296.48€169.00$179.14£146.84AUD279.916% off
- Item No. CN-AD186
- Free Shipping
Autel MaxiBAS BT506 is a battery and electrical system analysis tool that use as Adaptive Conductance an advanced battery analysis method, to produce a more accurate examination of the battery's cold cranking ability and reserve capacity, vital to determining a battery's true health. BT506 enables technicians to view the health status of vehicle's battery and electrical system. Download the free and easy-to-use mobile app, available for iOS and Android devices, to use with the BT506 to perform testing and display test results.
1. How to bind BT506
2. How to use BT506
Part 1. How to bind BT506?
Scan the QR code on the back your device to pair the tester.
Go to
Battery Test>>BAS BT
To connect BT506 to your tablet.
Part 2. How to use BT506?
In-vehicle test
Example: Land Rover Freelander 2007
First connect BT506 Battery Analysis Tool to car battery, positive to positive, negative to negative.
Connect Autel tablet to the vehicle via VCI.
Turn on tablet,
Select
Battery Test>>In-vehicle Test
Select Type, Standard and Capacity and press "Next".
1)Battery
Follow prompts, tick them all and press “Start Testing”.
2)Starter
3)Generator
Turn off electrical appliances such as headlamps and A/C and press Continue.
Keep the engine speed at 2,000-3,000 rpm and press Continue.
Release the accelerator pedal and press Continue.
Turn on electrical appliances such as headlamps and A/C and press Continue.
Again keep the engine speed at 2,000-3,000 rpm and press Continue.
Release the accelerator pedal and press Continue.
Turn off the ignition and electrical appliances and press Continue.
Out-vehicle test
Device: Autel MaxiSys MS906BT
Connect BT506 to car battery.
Turn on tablet,
Select
Battery Test>>BAS BT
Connect tablet to BST506 via Bluetooth. (If you've connected already, it'll skip this step)
Enter "Out-vehicle test"
Select Type, Standard and Capacity and press "Next".
Select "Start testing" to get report.
