Autel IM508 VS IM608 VS IM608pro-comparisonChart.pdf (327K)
Autel IM608 IM508 MQB Operating Instruction.pdf (1.1M)Product | Autel IM508 | Autel IM608 | AuroOtosys IM100 | AuroOtosys IM600 |
IMMO | ||||
Smart Mode(Guided and Automated Key Learning Function) | √ | √ | √ | √ |
Expert Mode(Advanced Key Learning) | √ | √ | ||
Auto Detect Make/Model/Year/System | √ | √ | √ | √ |
Read Pin/CS | √ | √ | √ | √ |
Read Pin/CS(All Key Lost) | √ | √ | √ | √ |
Key Generation | √ | √ | ||
Key Learning | √ | √ | √ | √ |
IMMO ECU Reset/Adaption | √ | √ | √ | √ |
IMMO ECU Refresh/Coding | √ | √ | √ | √ |
Remote Learning | √ | √ | √ | √ |
Backup/Restore IMMO Data | √ | √ | ||
Audi Q5/A4/A5 2015-2017 Read Pin/CS |
√ | N/A | √ | |
BMW FEM/BDC Key Learning and Adaption | √ | √ | √ | |
Mercedes Key Learning | √ | √ | ||
Benz 3rd Generation IMMO Add Key,All Key Lost,Key Learning | √ | |||
BMW FEM/BDC Key Learning and ECU Adaption | √ | √ | ||
BMW CAS4/3/2 Key Learning | CAS4 Available when Connected to XP400 | √ | ||
VW/Audi MQB(VDO & JCI)Add Key,IMMO V A4/A5/Q5 2015+ Key Learning | √ | |||
VW/Audi/Skoda/Seat IMMO III/IV/V Add Key,All Key Lost | √ | √ | ||
Programming | ||||
Key Read/ Write | √ | √ | ||
EEPROM Read/ Write | √ | √ | √ | √ |
MCU Read/ Write | Basic | Advanced | Basic | Advanced |
ECU Read/ Write | When Connected to XP400 | √ | ||
MC9S12 Encryption Chip Read/ Write | When Connected to XP400 | √ | ||
IC Card Read/ Write | When Connected to XP400 | √ | N/A | √ |
Mercedes Infrared Key Read/ Write | When Connected to XP400 | √ | N/A | √ |
Remote Frequency Detect | When Connected to XP400 | √ | N/A | √ |
Support PC | When Connected to XP400 | √ | ||
OE-Level Diagnostics | ||||
All System for Over 80 Markes and Models | N/A | √ | √ | √ |
AutoVIN/ Auto Scan | √ | √ | ||
Read/ Erase Codes | √ | √ | ||
View, Record, Playback Live Data | √ | √ | ||
View Freeze Frame Data | √ | √ | ||
Shop and Data Manager Application | √ | √ | ||
MaxiFlash JVCI ECU Reprogrammer(Bluetooth/ USB Cable) | N/A | √ | N/A | √ |
Advanced Service Functions | ||||
Oil Serive Reset | √ | √ | √ | √ |
Parking Brake Pad Relearn After Replacement | √ | √ | √ | √ |
Steering Angle Sensor Relearn | √ | √ | √ | √ |
Battery Registration and Reset | √ | √ | √ | √ |
Diesel Particulate Filter Regeneration | √ | √ | √ | √ |
Tire Pressure Monitoring System Sensor ID Relearn | √ | √ | √ | √ |
ECU Coding | N/A | √ | N/A | √ |
VW/Audi Component Protection | N/A | √ | ||
Complete Service Functions | N/A | √ | N/A | √ |
Tool Features | ||||
Built-in Rechargeable Lion Battery | 5000 mAh | 15000 mAh | 5000 mAh | 15000 mAh |
Internet Updatable | Wi-Fi | Wi-Fi | Wi-Fi | Wi-Fi |
Multilingual Support | √ | √ | √ | √ |
Touchscreen | 7-Inch | 10.1-Inch | 7-Inch | 10.1-Inch |
Memory | 32GB | 64GBP | 32GB | 64GBP |
Processor | Cortex-A9 Processor | Cortex A7+A15 Six-Core Processor | Quad-Core Processor | Hexa-Core Processor |
Camera | N/A | 8.0 Megapixel | N/A | 8.0 Megapixel |
Resoluton | 1024×600 | 1920×1200 | 1024×600 | 1920×1200 |
Note: XP400 can be pruchased separately Some listed functions are manufacture dependent. Constantly update MaxiIM for current vehicle coverage. Update software regularly for most accurate tool features. |
||||
One user gave a feedback that during the password calculation process of Autel MaxiIM IM608 it’s asking him to insert the key into the EIS for 10 seconds. What puzzles him is that the prompt displays almost every minute until the calculation success.
He’d done Benz key programming for several times but never had this happen before, and this time the car is Benz W220 2003. After repeating the step for many times, finally he got the password.
Besides, this issue happens on others as well. They said they’ve done this about 12 or 15 times to get the password and it’s normal to work on old Benz models.
Possible reason and solution:
Here our technical support believed that because of the old model the transmission signals of the EIS that turns rusty weakens. So they’d better try more time as the prompt.
In addition, our technical support prompts that there are three modes to calculate the Benz password by Autel MaxiIM IM608: On Vehicle, On bench(G-Box) and On bench. So make sure the connections are correct as the prompts and diagrams of different modes. For instance, On Vehicle mode often requires a bypass; Care the connections when Autel G-Box2 adapter is needed, etc.
Therefore, the prompt “Insert the ignition key into the EIS and wait for 10s” is normal, just follow the prompts and finally it will give you the password.
Done!