Unlock FGTech Galletto 4 Master V54 BDM OBD is a famous chip tuning tool for all cars, trucks, motorcycles, Marine, BDM MPCxx, BDM Boot Mode, checksum.
1. It can work for FGTech Galletto 4-Master and BDM-OBD.
2. It can support multi-languages.
3. It is unlock version, can use directly.
V2.13 KTM100 ECU Programming Tool Master Version V7.003 from CarDiagTool.co.uk:
1 Latest software V2.13 with newest hardware version V7.003
2 Support BDM Function Well, Available Protocols BDM MOTOROLA MPC5xx
3 Support both Car, Motorcyle and Truck ECU Programming.
BDM 100 is a universal ECU reader/programmer that allows the user to read and program files in the ECU supplied with MOTOROLA MPC5xx processor.
XPROG-M V5.55 XPROG M Programmer for BMW CAS4.
1. Without operation system limitation.
2. Software can be installed on Windows XP/ 7.
3. Add new authorization: AUTH-0025 Authorized 11/4/2014.
2.13V Ktag K-TAG Master ECU Tool V6.070 Plus V2.37 KESS V2 Unlimited Token Firmware V4.036 Send Free ECM TITANIUM V1.61
![[DHL FREE SHIP]V2.37 KESS V2 plus V2.13 KTAG K-TAG plus FGTech V54 Galletto 4 Master](/upload/pro-sm/417-kess-ktag-fgtech-ecu-programmer.jpg)
V2.37 KESS V2 plus V2.13 KTAG K-TAG plus FGTech V54 Galletto 4 Master , three in one.
Cheaper than single one and save shipping cost
It is possible to permanently damage the ECU(ECM/PCM) during the falsh reprogramming process.You must read and understand the following precautionary information before proceeding with reprogramming.
New Upa-usb is the full set with all adapters, The main Device can be directly connected to the Elrasoft.com UUSP (UPA-USB Serial Programmer) or by an optional DB9 male / female 1:1 extension cable. It's equipped with an 40pin ZIF Socket for all narrow and wide DIP / DIL devices as well as with a 16 pin SOIC ZIF (150mil, narrow) socket to cover most commonly used devices.
TMS374 ECU Decoder is a frequency sweeper with 5V square wave output (Duty cycle 50%, effective frequency range from over 10kHz (max 50kHz) to 50Hz) .This tool can be also considered as a MCU version of the software TMS-374 Decoder ECU.The only difference between the two tools is that the MCU version works without a PC.
4 IN 1 Motorola Programmer :SE12+SE13+SE14+SE15
![[Ship from UK]UPA USB Programmerfor Main Unit for Sale](/upload/pro-sm/new-upa-usb-2012-version-programmer-unit-10.jpg)
New UPA USB Programmerfor Main Unit for Sale
Main Unit of V2.23 KTAG ECU Programming Tool
Available Protocols: BDM MOTOROLA MPC5xx
Easy to use, automatically recognize ECU model, high stability.
Multi-Language available:Italian Deutsch English French Portuguese Spanish
FG Tech Galletto 4-Master V54 BDM-OBD is a famous chip tuning tool for all cars, trucks, motorcycles, Marine, BDM MPCxx, BDM Boot Mode, checksum. This item cannot only work as fgtech galletto 4-Master, but can also work for BDM-OBD.
Galletto 1260 RL232 imported chips is an easy hardware for auto chip tunning.Galletto 1260 is compatible with the newest modern diesel TDi, HDi, JTD, and petrol cars.Supported Languages: English, Spanish, French, German, Italian, Portuguese.
MB CAN Filter 5 in 1 for W221 W204 W212 W166 and X166
FGTECH Galletto V54 Plus DELL D630 1GB Laptop with 80GB Hard disk, this is a package offer for resolving customers who can not run fgtech on their own laptop. Every package will be installed software and tested before shipping, we guarantee it can run successfully on the computer we provide.
D80D0WQ ERASER/Programmer was used to read, program, and erase incremental registers\EEPROM. Compatible with Windows 98/2000/XP.
S-100 Ultra-high Speed Stand-alone Universal Device Programmer support more than 300 IC manufacturer, More than 80000 pcs devices.Support devices with Vcc Voltages as low as 1.2v,extremely fast speed.
UUSP UPA-USB Serial Programmer Full Package V1.2 B Yellow Color
