GODIAG V600-BM BMW Diagnostic and Programming Tool Supports DOIP K-Line CAN FD

Product Description

GODIAG V600-BM BMW Diagnostic and Programming Tool

GODIAG V600 is a BMW professional diagnostic & programming / coding tool, it will replace GT1, OPS, OPPS, ICOM, ICOM A2, ICOM A3, ICOM NEXT.
V600-BM CAN-FD J2534 can access to all systems of newest BMW car models to quickly read / clear fault codes, read dynamic data stream, active test, activation, components replacement, ECU replacement and upgrading, personalized settings, ECU programming , retrofitting and upgrading car configuration, SCN Coding, transmission initialization, enable the hidden features etc. 

GODIAG V600-BM Highlights:

1. Same working function as BMW ICOM/ BMW ICOM Next
2. ECU programming and calibration.
3. Fully compatible with official diagnostic software
4. Perform vehicle intelligent diagnosis, all-system all-function fast diagnosis; can read & clear fault codes, read data stream, actuation test etc.
5. Multi-task diagnosis: based on the efficient architecture design of diagnosis service software
6. Diagnostic feedback: support one-key upload the device logs. If you encounter exceptional vehicle and abnormal function, you are allowed to report the problem to the manufacturer, then the technicians will track and handle your problem.

Optional: You can buy the latest BMW software HDD
 
GODIAG V600 Update Schedule:

1. Plan to add authorization of  Benz, Land Rover, Jaguar, CAN-FD, Toyota, VW, Audi (ODIS software)
2. Dedicated Android APP is under development , it will support both Ethernet  and WiFi
communication.
 
Comes with ISTA-D, ISTA-P, Tool32,  For BMW Coding, ISPI, INPA, E-SYS, WINKFP, NCS-Expert Tool, and you can directly run them.
 
Compatible Protocol: J2534, CAN-FD, DOIP, D-CAN, ISO14230, ISO15765, IFH, K-line ******



Support OEM professional diagnostic function of all For BMW series:

1 series: 1'_E81/E81/E87/E88,1'_F20/F21
2 series: 2'_F22/F23,2'_F45/F46,2'_F87
3 series: 3'_E46,3'_E90/E91/E92/E93, 3'_F30/F31/F34/F35,3'_F80
4 series: 4'_F32/F33/F36,4'_F82/F83
5 series: 5'_E39,5'_E60/E61,5'_GT(F07), 5'_F10/F11/F18
6 series: 6'_E63/E64,6'_F06/F12/F13
7 series: 7'_E38,7'_E65/E66,7'_F01/F02/F03/F04, 7'_G11/G12
X series: X1_E84,X1_F48/F49,X3_E83,X5_E53,X5_70,X6_E71,
X6_E72,X3_F25,X5_F15/F85,X6_F16/F86,X4_F26
Z series: Z4_E85/E86,Z4_E89
I series: I'_I01/I02
MINI:  MINI_R50/R52/R53, MINI_R55/R56/R57/R58/R59/R60,  MINI_F55/F56

GODIAG V600 stand-out features:

1. Contained with dedicated For BMW software (same as ICOM, ICOM A2 / A3 / NEXT etc, no need to install any driver.)

1) ISTA-D: used to read / erase fault codes, read the data flow, maintenance guidance, circuit diagram, wiring diagram and directly upgrade & program new models. It will activate the ignition switch without keys during diagnosis.



2). ISTA-P: an off-line programming and coding software system, including the latest database for programming E, F, G, K, I series models



3). Engineer programming & coding software for F series vehicles 



4). WINKFP: engineer programming software for E series vehicles.
5). NCS-Expert Tool: engineer programming software for E series vehicles.
6). INPA: engineering diagnostic software for E series vehicles.



7). Tool32: engineer command execution software for E series vehicles.
8). For BMW Coding Tool: WINKFP NCS auxiliary software for importing engineer data for E series vehicles.



2. Provide a variety of communication modes:

USB 2.0 
DoIP indicator
Ethernet 10/100Mbps
WIFI/BT 802.11 indicator  150Mbps
ETH indicator
System Indicator



3. Specifications

Suitable power: 7-32 V  
About 300 mA when the power is 12V
High-speed processor: CPU 580 MHz MIPS, 32MB FLASH,128MByte RA, Built-in 32G TF card(optional)

4. Replace any of these For BMW diagnostic tools: For BMW ICOM, ICOM A2 / A3 / Next etc. 



V600-BM Parameters:
 

Shell	The shell is made of Polyamide. Size:108 x 52 x 27 mm
Power Supply	7-32 V
Current Consumption	About 300 mA when the power is 12V
CPU	580 MHz MIPS, 32MBFLASH, 128MByte RA,built-in 32G TF card(optional)
Operating System	Linux
WiFi	150Mbps Wi-Fi 1T1R 802.11bgn
Bluetooth	BLE supports Bluetooth5.0/5.1
Interface	USB 2.0 Ethernet 10/100Mbps
Indicator	DoIP indicator WIFI/BT indicator ETH indicator System indicator
Buzzer	Sound Pressure Level:  MIN.80 dB
Temperature	Working：-20 ... +55°C, Storage：-20 ... +85°C
Protection Rating	Dust prevention and water resistance conform to IP52
Conform to Electromagnetic Compatibility	Noise emissions：EN 55011,EN 55022 Anti-interference：EN 61000-6-2, EN 61000-6-4

 
Status LEDs

KEYs	Function description
F1	Press it for more than 3s to reset factory setting
F2	Press it to restart system

 
Package includes:
  Original Autel Brand Tools, Ship from EU/UK No Tax


Hot ECU programmer, kess v2/ktag/ktm bench/iprog...


Any questions, please don't hesitate to contact us.

Email:  sales@CarDiagTool.co.uk
Skype: cardiag.co.uk
Whatsapp: +86 15002705698



Shipping Method & Delivery:

UK/EU Warehouse Shipping: 3-5 working days. Fast Delivery No Tax.
EU Check: Ship from EU
UK Check: Ship from UK
DHL Shipping: 5-7 working days, you need pay some tax to your customs. Usually we declare a lower price on DHL invoice to help with customs clearance. If your address belongs to remote area, customer will need to pay remote handling cost. Please remember to leave message if you have any special requirement.
Yanwen Express: 10-15 working days. No Tax or remote cost for European Countries.
Yodel/Royal Mail: Just for United Kingdom. No Tax, and the delivery is about 7-10 days.
Standard Post: The delivery is about 15-20 days, no tax. Order under $150 normally with default shipping Standard Post, customers can tick for Express Shipping Service to ship by DHL.

---

After sale service:
Almost all item has one year warranty.
We also offer free fix to almost item we sold within one year,free repair.Man-made damage need pay.
We not offer warranty on keys,cables,adapter,online sent software ,please notice it.