1. CGDI Prog BMW with High technical tool which mainly doing Auto diagnose, programming and security maintenance
2. Support CAS4/CAS4+ All Key Lost
3. Support BMW Key Programmer with OBD Functions
6. Certification: CCC,CE,GS, CCC,CE,GS,ISO
1.Update in real time,products updated in zero cycle time,support model added in real time.
2.BMW CAS3/CAS3+Data repair--support change replace and split CAS computer,BMW MSV80/MSV80.0/MSD80/MSD80.0/MSD85/engine change computer,ISN code reading and writing.
3.Equipment security greatly enhanced, the hardware anti-crack,anti-software copy.
Method 1: can read directly ISN code in the car,pls be assure car voltage is 12V above,directly connect OBD to operate--time about 5 minus.
Methods 2: can directly split engine computer (DME) to operate--connectline as follows:
MSV80/D80/D85/wiring in the experimental bench
CGDI Prog BMW MSV80 Software Update Guide:
Step 1. Receive message " There is a new version", click on "OK"
Step 2. Click on "Setting", then "Check for updates", waiting until the next dialog box appears.
Step 3. Checking local file.
Step 4. Detects a new file, click "Yes" to update.
Step 5. Downloading file.
CGDI Prog BMW MSV80 Firmware Update Guide:
Step 1. Connect CGDI Pro device to the computer, open CGDI software.
Step 2. Click on "Setting" and then "Upgrade the firmware", waiting.
Step 3. Updating...
Step 4. CGDI programmer firmware update successfully, again click on "Upgrade the firmware".
Step 5. Get message reading " The version is already up to date without upgrading". Click on "OK".
CGDI BMW Software Display:
1pc x CGDI Prog BMW MSV80 Main unit
1pc x Adapter
1pc x USB line
CGDI Prog BMW Customer Feedback:
CGDI BMW can reprogram EGS for 2009 BMW x5.
CGDI Prog BMW supports BMW 650i 2003 all key lost.
CGDI BMW can read and write the ISN EWS egs for BMW M5 F10 dct gearbox 2013. Can read from DME and write into egs.
CGDI PROG bmw f20 2014 mileage reset OK
Read ISN DME MSD80 OK 5WK93628
Excellent tool so far. no bricks or problems.
extremely fast for cas1, 2 & 3
for cas3+ if need downgrade 10 minutes and seems safe.
make sure you have proper power on the car
cas4 F10 - ok (new key)
cas4+ F10 - ok (new key) isn from org key or dump DME
fem/bdc F31 - ok - reset mileage, change isn, change vin, make keys with oryginal key and with dump from DDE
cas3+ E60- ok , downgrade and make key with isn from org key
You can reuse an old key and reprogram it, there is a button that says unlock key. I tried and worked with aftermarket key, did not try on a original BMW key to unlock(tested on e60 cas2)
and yes it is safe if downgrade for CAS3+.
Read ISN form MSV80 result OK
Read and write ISN cas 3 result OK
Did a 2008 E60 CAS3+ had to DOWNGRADE it took about 10min and programmed key successfully
Did a 2008 E60 528i it asked for Downgrade it took around 10min no error codes all perfect key works
Instructions for cas4 F10 key programming:
Cas4 can only be done by reading DFlash from Freescale cpu then load into programmer software and generate key. It can no ne done by obd.
You need xprog or vvdi prog to read the dflash.
V184.108.40.206 NEW (2021.08.30)
CGDI BMW Latest Update:
1. Added Italian version
2. BMW EGS Change: Added 6HP(E) - Bench:
(1)Read EGS ISN, EGS status, Clear EGS ISN, Modify VIN, ECU reset
3. Fix some bugs and optimize software performance
1. 'FEM/BDC Key Match', 'BMW E Series Coding', 'BMW F/G Series Coding', 'BMW Diagnosis' Function optimization
2. Fix some bugs and optimize software performance
1.Fix the problem of abnormal download of programming files
2.N13/N20/N55/B38 Read/Write ISN: Added type
3.New in main interface - "Online tutorial"
1. BMW EGS Change: Added 6HP(E):
(1)Read EGS ISN, EGS status, Reset adaptation, Modify VIN, ECU reset
(2)Some EGS supports 'Read EGS ISN': 7576211, 7572988, 7582344, 7582348, 7567223, 7567224, 7567406, 7568222, 7572416, 7573660, 7575795, 7575796, 7591972, 7605219, 7606220, 7591971, 7599827, 7607116
2. CAS Mileage Reset: Added 'Sync ELV'
3. N13/N20/N55/B38 Read/Write ISN:
(1)Added 'Modify VIN'
(2)Added type: EDC17C06, MEVD17.2.8
4. FEM/BDC Key Match: Add 00002419.082_010_030, 00002419.083_010_010 two versions of FEM/BDC with key
5. BMW Diagnosis: updated version DIAG_4.28.12
6. Display optimization: BMW Data Repair, CAS1-3+ Key Match(OBD), BMW F/G Series Program
7. Technical support video update
8. Fix some bugs and optimize software performance
1. Fix CAS3 Key Match, CAS4 Key Match: Generate dealer key
2. Fix BMW Data Repair: Input the original key data
3. Fix BMW E Series Program: bootloader program
4. Fix some bugs and optimize software performance
CGDI V3.2.0 NEW(2020.12.29)
1. Software interface optimization and upgrade
2. Porsche Key Learning added 2M25J chip Learning：Read basic information, Key learning, Load EEPROM
3. CAS4 Key Match(OBD) added "Repair remote key intelligence"
4. Key Match process and display optimization
5. BMW data Repair process optimization
6. Fix some bugs and optimize software performance
CGDI V3.1.4 (2020.07.10)
1. FEM/BDC Key Match:
(1.1) Added Remote key repair function
(1.2) Optimization Mileage reset
2. CAS4 Key Match(OBD): fix 1L15Y Mileage reset
3. N13/N20/N55/B38 Read/Write ISN: Added type
4. Optimization File loading: CAS3 Key Match, BMW Data Repair
CGDI V3.1.3 (2020.05.11)
1. Cas4 Key Match：Add fast pre-processing method, support 5M48H/1N35H/1L15Y:
1.1 Only 2 minutes for pretreatment
1.2 Support OBD backup D-FLASH (EEPROM), P-FLASH
1.3 Support OBD replacement CAS4
1.4 Display Optimization
2. N13/N20/N55/B38 Read/Write ISN: Added type
3. BMW Data Repair: Added B38 modification VIN，ISN
CGDI V3.1.2 (2020.04.28)
1. BMW E Series Program: fix the problem of parking brake programming key failure
2. BMW Data Repair: when loading CAS3, CAS4 encrypted files, add the option to input the original key data
3. ICOM Function: Optimize connection
4. New and optimized interface:
4.1. Added Settings-software activation, technical support
4.2. Added After-sales contact information (upper left corner of the main interface)
CGDI V3.1.1 (2020.01.16)
1. Display Optimization
2. You cannot use the device with the old software version, please install the latest software version
1. Added Turkish version(Need authorization)
2. Firmware upgrade
1. Added BMW EGS Change(F Series-6HP) [Erase and reset]
2. Added BMW E Series Program [Advanced programming]
3. Optimize CAS4 Key Match, FEM/BDC Key Match, ISN Show window
4. Fix user registration issues
CGDI V3.0.1 (2019.11.09)
1. Added G_B48 B58 read ISN
2. Added MSV80 read ISN(BENCH)
3. Added ICOM function (does not support XP computer system)
4. Optimize CAS4 Key Match(OBD) processes
5. Optimize BMW Key Match(OBD), CAS1-3+ Key Match, FEM/BDC Key Match interface
CG-DI V3.0.0 (2019.09.28)
1. Added CAS4 Key Match(OBD) to support(1N35H/5M48H),Exist in BMW Key Match(OBD).
2. Added BMW F/G-series hidden code
3. Added BMW Key Match(OBD),Automatic identification of BMW anti-theft type(Contain:CAS1-3+ Key Match,CAS4 Key Match,FEM/BDC Key Match)
CG-DI V2.6.0 (2019.03.05)
1. Added: EWS1-3 key matching function.
2. The E-code is modified to modify the VO code function, and the VO code can be added or deleted directly by the selection method, and the operation is simpler.
3. The BMW data modification adds support for both N13 and N55 engine data.
CG-DI V2.5.0 (2019.01.10)
1. Added BMW E series programming, support single module programming of E60, E65, E70, E89, R56 and other chassis models (multimedia module requires fiber optic communication, temporarily not supported).
2. Added BMW E series code, support E60, E65, E70, E89, R56 and other chassis models single module code, backup code and recovery code.
3. FEM/BDC key matching: Add 0000155E.018_120_010, 00002419.081_010_020 two versions of FEM/BDC with key.
4. F/G system programming: increase the support of swfk, flup, blup programming files, and fix some programming failures.
5. CAS1-CAS3+ key matching: increase the Rolls-Royce CAS1, CAS2 key matching.
6. BMW data modification: Add CAS3+, CAS4+ ISN encryption and decryption functions.
7. Maserati Mileage Adjustment: Added the function of saving EEPROM data.
8. BMW F-series codding:Fix List display incomplete.
CG-DI V2.4.0 (2018.12.13)
1. New: BMW data modification function: support CAS3/3+ data modification VIN, ISN, support CAS4/4+ data VIN, ISN modification, support N20 data VIN, ISN modification.
2. BMW F/G series programming: support automatic code setting after programming; repair some problems of instrument programming failure; repair some EPS programming failure problems; repair ECU list display error.
3. CAS mileage reset: fix the problem of partial version programming failure.
4. Firmware upgrade: Improve USB communication performance.
CGDI BMW V2.3.0(2018-11.21):
1. New: Porsche 987, 911 OBD key learning
2. New: Maserati Levante 95320, Geberit 95160, President 95160 Instrument OBD mileage adjustment
3. FEM/BDC key matching: Optimize the pre-processing process, increase backup FAFP, restore FAFP function, calculate ECU data, reset starter lock, calculate ELV data function, and add repair remote control function description.
4. BMW F Series Programming: Supports instrument programming greater than 10MB. The modules to be programmed are displayed in red font, and the code modules are displayed in blue font.
5. BMW F system code: Optimize the modules to be programmed in red font.
6. 95128/95256 adds 95540 chip read and write.
CGDI BMW V2.2.2 Update (June 22th, 2018):
1.BMW OBD key matching: increase "add key" function.
2.FEM/BDC match key:
(1)increase 95128/95256 read and write function (need use full adapter included )
(2)repair and change FEM/BDC the problem of writing data error
(3)increase new version SWFL support (ISTA-64)
(1)increase F series read DME ISN type :MEVD172Y MEVD1724 MEVD1725 N63TU_R0 N63TU_L0 S63TU_R0 S63TU_L0
(2)increase E series read DME ISN type :ME17N45(N45 Tricore) MEV17N46(N46 Tricore) MED17_2 MED17_2N(N14 Tricore) MEV17_2 MEV17_2N(N12 Tricore) MV1722(N16 Tricore) MVD1722(N18 Tricore) MEVD174K(N20, Tricore) MEVD176K(N55 Tricore) MVD1727(N18 Mini Tricore) MEVD17KW(Tricore) MSV70 MEV9N46L ME9N62 MEV9N46 N62_TUE N62_TUE2 MS450DS0 ME9N62_2 ME9N45 ME9E65_6 N73_L0 N73_R0 D7xN47xx D7xN57xx D60PSA0 MSS60 DDE604 DDE626 DDE603 DDE509 DDE606 DDE608 D50M57A0 DDE506 D50M57C0 D50M57E0
CGDI BMW V2.2.0 update:
1. Increase BMW F series coding, restore coding and backup coding.
2. Add BMW EGS function.
3. Add read/write BMW CAS ISN (4 bytes) feature.
4. Modify software auto activation display, increase user interaction.
5. DEM wiring diagram optimization provides full-screen display.
6. BMW OBD key matching and FEM/BDC compatible small screen display.
7. Modify CAS4 key whether display error.
8. Other bugs fix.
3-5 working days. Fast Delivery No Tax.
5-7 working days, you need pay some tax to your customs. Usually we declare a lower price on DHL invoice to help with customs clearance. If your address belongs to remote area, customer will need to pay remote handling cost. Please remember to leave message if you have any special requirement.
10-15 working days. No Tax or remote cost for European Countries.
Just for United Kingdom. No Tax, and the delivery is about 7-10 days.
The delivery is about 15-20 days, no tax. Order under $150 normally with default shipping Standard Post, customers can tick for Express Shipping Service to ship by DHL.
Almost all item has one year warranty.
We also offer free fix to almost item we sold within one year, free repair. Man-made damage need pay.
We not offer warranty on keys,cables,adapter,online sent software ,please notice it.