VVDI PROG Programmer Software Download

VVDI Prog FAQs about Error&Solution:

1. Q: VVDI Prog read PCF7952,it failed "Chip not connect"?

A: Please check the connection diagram, and the pins connection.

2.Q: VVDI PROG 95640 read OK but write not (write error on the beginning).
In this case check the eeprom package before any operation, and the operating voltage is clearly marked
You can check here (sorry for the bad picture it was taken by mobile and enlarged)
First row: S64S
The last digit is "S" = 1.8V-3.6V
You have to adjust the vvdi voltage to the correct value (default is 4.5V)

3.VVDI Prog Sprinter W906 EIS reading via new ST questions and answer
Q: VVDI Prog read Sprinter W906 EIS via new ST. Adapter is not working, had to use V1 flash cable to read the eeprom.

A: The connections points on PCB must be cleaned before !!!

Not only take pcb from EIS and quickly put to EZS adapter and await 100% result in 1 seconds like many other users…

Q: Spent an hour moving it slightly, even tried sprinter 2006- from the drop down menu , but with no luck ,V1 flash cable job at the end.

A: Of course work only right choice when use EZS adapter….and dont forget to use external +12V power

Q: Didn’t clean the pcb mate, of course 12v connected, but i looked under the mag. it seemed that the pins are slightly off! oh well the job is finished , i will check the next one , or buy one to check. thanks mate.

A: Every time need to have some donor pcs on stock….not wait until is needed

4.Q: Read Benz EIS OK, but write or verify got error?

A: Please go to setting >>environment, tick off the selection.

5. Q: Read the MC9S12, it got error "chip is crypt, this operation needs to decrypted"?

A: Please choose secured type in VVDI Prog software to read.

How to update VVDI Prog programmer software & firmware?

 

Open VVDI Pro software

Click “Upgrade” tab

 

Then come to VVDIProg Update menu. You are able to check software version (Tip Information) and firmware version (Device Information).

 

(NOTE: Newest VVDI-Prog does not need to update firmware)



V5.1.5 VVDI Prog Update Info (2022-05-30)
* Fixed some option diagrams in 
  <2-MCU>->
+ Add  D70F3187,
  D70F3483F1
  options in
 <2-MCU>->
+ Add PASSAT option in
  <5-DASHBOARD>->  
+ Add AUAHAN QIYUE option in
  <7-AIRBAG>-> 
+ Add DISCOVERY4 SRS(SECURED)
  option in 
  <7-AIRBAG>->  
+ Add AUDI EPS(D70F3483F1)
  option in <8-OHTER>->   
+ Add ML350 AC PANEL,
  BENZ 166 FRONT SAM MODULE,
  BENZ 166 SEAT MODULE,
  BENZ S350 PLGM(2010),
  BENZ W166 EPS(D70F3483),
  BENZ W166 EPS(D70F3485)
  options in
  <8-OTHER>->
+ Add BMW G38 EPS(D70F3508)
  option in <8-OHTER>->
+ Add CADILLAC EPS(D70F3485)
  option in <8-OHTER>->
+ Add CAVALIER EPS(D70F3506)
  option in <8-OHTER>->   
+ Add 2014 RUIJIE SKYLIGHT MOTOR 
  option in <8-OTHER>->
+ Add Lincoln MKX EPS(D70F3506)
  option in <8-OHTER>->
+ Add CAMRY AC COMPUTER 
  option in <8-OTHER>->

Newest V5.0.9 VVDI Prog Update (2021-12-1)
VVDI Prog 5.0.9 Software Download(password: 123456)
* This version DON't need update firmware
* Modify LOCK_BCM2-1(ADAPTER), LOCK_BCM2-1(WELD), LOCK_BCM2-2(ADAPTER), LOCK_BCM2-2(WELD),options in<4-IMMOBILIZER>->:
* Modify DASHBORAD(2013--)(SPC5604S), DASHBORAD(2013--)(SPC5606S), options in <5-DASHBORAD>-> VCC default voltage changed to 3.7V
+ ADD MA82G5A64, MA82G5B16, MA82G5B32, MA82G5C32, MA82G5C64, MA82G5D16, MG82F6D16, MG82F6D17, MG82F6D32, MG82F6D64, MG82G5E32, options in <2-MCU>->
+ Add R5F21386, R5F21387, R5F21388, R5F2138A, R5F2138C, options in <2-MCU>->
+ Add R7F701202, R7F701204, R7F701215, R7F701216, R7F701270, R7F701271, R7F701275, R7F701278, options in <2-MCU>->
+ Add D70F3441, D70F3447, D70F3483, options in <2-MCU>->
+ Add J518(2010)(0L01Y)(ADAPTER), J518(1L59W/3L40K)(ADAPTER) options in <4-IMMOBILIZER>->
+ Add CAS3+-0L15Y(ADAPTER), CAS3+-0M23S(ADAPTER), CAS3-0L01Y(ADAPTER), CAS3-2K79X(ADAPTER), CAS4-1L15Y(ADAPTER), CAS4-1N35H-BACKUP(ADAPTER), CAS4-1N35H-FORCE-UL(ADAPTER), CAS4-1N35H-R/W/UL(ADAPTER), CAS4-5M48H-BACKUP(ADAPTER), CAS4-5M48H-FORCE-UL(ADAPTER), CAS4-5M48H-R/W/UL(ADAPTER), options in <4-IMMOBILIZER>->
+Add 48-IMMO(ADAPTER) option in <4-IMMOBILIZER>->
+ Add NATS5-IMMO option in <4-IMMOBILIZER>->
+ Add BCM-1L15Y(ADAPTER), BCM-1N35H-BACKUP(ADAPTER), BCM-1N35H-FORCE-UL(ADAPTER), BCM-1N35H-R/W/UL(ADAPTER), BCM-2M25J-BACKUP(ADAPTER), BCM-2M25J-FORCE-UL(ADAPTER), BCM-2M25J-R/W/UL(ADAPTER), BCM-5M48H-BACKUP(ADAPTER), BCM-5M48H-FORCE-UL(ADAPTER), BCM-5M48H-R/W/UL(ADAPTER), options in <4-IMMOBILIZER>->
+ Add CEM V50(2008)(MC9S12XDT512), CEM(R5F64524)((ADAPTER), CEM(R5F64525)(ADAPTER),
CEM1(R5F64524)((ADAPTER), CEM1(R5F64525)(ADAPTER), KVM(ADAPTER), options in <4-IMMOBILIZER>->
+ Add LACROSSE(2009-2013) option in <5-DASHBOARD>->
+ Add EADO-DT(2018) option in <5-DASHBOARD>->
+Add FIT_H(MB91F061BS)(ADAPTER), FIT_L(MB91F061BS)(ADAPTER) options in <5-DASHBOARD>->
+Add SONATA(MB91F062BS)(ADAPTER) option in <5-DASHBOARD>->
+Add K3(MB91F067BS)(ADAPTER), K5(MB91F061BS)(ADAPTER) options in <5-DASHBOARD>->
+ Add 523-AIRBAG option in <7-AIRBAG>->
+ Add SONG-MAX option in <7-AIRBAG>->
+ Add 3658110XPW01A option in <7-AIRBAG>->
+ Add FRM-E-SERIES(ADAPTER), FRM-E-SERIES_REPAIR(ADAPTER) options in <8-OTHER>->
+ Add MaLiba XL EPS(2020)) option in <8-OHTER>->
+ Add RFA_SEC(9S12XEQ384)(ADAPTER), RFA_SEC(9S12XET256)(ADAPTER) options in <8-OTHER>->

v5.0.6             (2021-09-13)
* This version DON't need update firmware
+ Add D70F3485 option in
<2-MCU>->
+ Add BCM2(D70F3381/3634)(ADAPTER),BCM2(D70F3381/3634)(WELD),
BCM2(D70F3382/3635)(ADAPTER),BCM2(D70F3382/3635)(WELD),
LOCK_BCM2-1(ADAPTER),LOCK_BCM2-1(WELD),
LOCK_BCM2-2(ADAPTER), LOCK_BCM2-2(WELD),
options in <4-IMMOBILIZER>->
+ Add CEM1(R5F64525)option in
<4-IMMOBILIZER>->
+ Add GL6-AIRBAG(2016)option in
<7-AIRBAG>->

VVDI-Prog v5.0.5       (2021-07-29)
* This version DON't need update
  firmware
+ Add MPC5632M,
  MPC5633M,
  MPC5634M,
  options in
  <2-MCU>-> 
+ Add CR16MCS9V,
  CR16MCT9V,
  options in
  <2-MCU>->  
+ Add R7F701417,
  R7F701437,
  R7F701441,
  R7F701442,
  R7F701461,
  R7F701462 options in
  <2-MCU>->
+ Add BUICK-REGAL-BCM(MC9S12XDP512)
  option in <4-IMMOBILIZER>-> 
+ Add S350 SRS(CR16MCT9VJE7)
  option in <7-AIRBAG>->

VVDI-Prog v5.0.3            (2021-05-28)
* This version DON’t need update firmware
+ Add FM3104,
FM3116,
FM3164,
FM31256,
options in
<1-EEPROM&FLASH>->
+ Add R5F11F_Data_8KB_Write,
R5F11FxJx_Flash_256KB_Write,
R5F11FxKx_Flash_384KB_Write,
R5F11FxLx_Flash_512KB_Write,
options in
<2-MCU>->
+ Add R5F11Wx7x_Flash_4KB_Write,
R5F11Wx8x_Flash_8KB_Write,
options in
<2-MCU>->
+ Add R5F11Yx7x_Flash_4KB_Write,
R5F11Yx8x_Flash_8KB_Write,
options in
<2-MCU>->
+ Add MPC5644B,
MPC5644C,
MPC5645B,
MPC5645C,
MPC5646B,
MPC5646C,
options in
<2-MCU>->
+ Add MPC5746G,
MPC5747C,
MPC5747G,
MPC5748C,
MPC5748G,
options in
<2-MCU>->
+ Add SPC564B64,
SPC564B70,
SPC564B74,
SPC56EC64,
SPC56EC70,
SPC56EC74,
options in
<2-MCU>->
+ Add MT22.1(MC9S12XET256)
option in <3-ECU>->
+ Add CADILLAC-CATSL
option in <7-AIRBAG->
+ Add CAMRY(R7F701A22)
option in <7-AIRBAG>->
+ Add BAOJUN510-PEPS(MC9S12XEG384),
BAOJUN560-ESCL(STM8AF6226)(2015),
BAOJUN560-PEPS(MC9S12XEG384)(2015)
options in <8-OTHER>->
+ Add HOWO-STRYKER-SECURED-DASHBOARD(19)
options in
<8-OTHER>->
+ Add MISTRA-47-PKE-MOUDLE(17)
options in
<8-OTHER>->
+ Add 70-CHIP-IMMO-MOUDLE
options in
<8-OTHER>->

VVDI PROG latest software version V5.0.2 update
v5.0.2 (2021-04-30)
** This version DON’t need update
firmware
+ Add D160XX(ST),
D80XX(ST)
M35080XX(ST),
M35160XX(ST)
options in
<1-EEPROM&FLASH>->
+ Add R5F10A/10B_Data_4KB_Write,
R5F10AxAx_Flash_16KB_Write,
R5F10A/10BxCx_Flash_32KB_Write,
R5F10A/10BxDx_Flash_48KB_Write,
R5F10A/10BxEx_Flash_64KB_Write,
R5F10A/10BxFx_Flash_96KB_Write,
R5F10A/10BxGx_Flash_128KB_Write,
options in
<2-MCU>->
+ Add R5F11B_Data_4KB_Write,
R5F11BxCx_Flash_32KB_Write,
R5F11BxEx_Flash_64KB_Write,
options in
<2-MCU>->
+ Add R5F11Z_Data_2KB_Write,
R5F11ZxAx_Flash_16KB_Write,
options in
<2-MCU>->
+ Add STM32F103xC,
STM32F103xE,
STM32F105x8,
STM32F105xB,
STM32F105xC,
options in
<2-MCU>->
+ Add Mitsubishi-Eclipse
Cross-BCM(D70F3380) option in
<4-IMMOBILIZER>->
+ Add CEM-V40-2014(SPC560B60L7)
options in
<4-IMMOBILIZER>->
+ Add CEM1(R5F64524)
options in
<4-IMMOBILIZER>->
+ Add SRS(MC9S12DG128-UNSECURED)
options in
<7-AIRBAG>->
+ Add ELANTRA-INDOOR-DISASTER-BOX(–17)
options in
<8-OTHER>->

VVDI Prog V5.0.1(2021-04-02)
* This version DON't need update
  firmware
+ Add R5F140_Data_8KB_Write,
  R5F140xLx_Flash_512KB_Write,
  R5F140xKx_Flash_384KB_Write,  
  options in 
  <2-MCU>-> 
+ Add R5F10J/10K_Data_2KB_Write,
  R5F10J/10KxCx_Flash_32KB_Write,   
  options in
  <2-MCU>-> 
+ Add R5F11AxJx_Flash_256KB_Write,
  R5F11AxHx_Flash_192KB_Write,
  R5F11AxGx_Flash_128KB_Write,
  R5F11A_Data_8KB_Write,
  options in 
  <2-MCU>->
+ Add R5F11Ex8x_Flash_8KB_Write,
  R5F11ExAx_Flash_16KB_Write,
  options in 
  <2-MCU>->
+ Add R5F109_Data_4KB_Write,
  R5F109x8x_Flash_8KB_Write,
  R5F109xAx_Flash_16KB_Write,
  R5F109xBx_Flash_24KB_Write,
  R5F109xCx_Flash_32KB_Write,
  R5F109xCx_Flash_48KB_Write,
  R5F109xEx_Flash_64KB_Write,
  options in 
  <2-MCU>->
+ Add SPC564B64 option in
  <2-MCU>->
+ Add CAS1-2K79X/0L01Y option in
  <4-IMMOBILIZER>->
+ Add BUICK-IMMO(2013)(HC08ASxx) 
  option in
  <4-IMMOBILIZER>->

VVDI Prog 5.0.0 (2021-03-09)
VVDI Prog 5.0.0 Software Download
* This version DON't need update
  firmware
+ Add VVDI PROG USER MUNUAL 5.0.0
  version in Doc folder
+ Add MAC9116VAG50 options in
  <2-MCU>->
+ Add MC68HC11A1,
  MC68HC11A8,
  MC68HC11EA9,
  MC68HC11E1,
  MC68HC11E9,
  MC68HC11E20,
  MC68HC11E32,
  MC68HC11F1,
  MC68HC11K4,
  MC68HC11KA2,
  MC68HC11KA4,
  MC68HC11KG4,
  MC68HC11KS2,
  MC68HC11KW1,
  MC68HC11P2,
  MC68HC11PA8,
  MC68HC11PH8,
  MC68HC711E9,
  MC68HC711E20,
  MC68HC711EA9,
  MC68HC711PH8 options in
  <2-MCU>->
+ Add  FORD-ECU(AM29BDD160GB) 
  option in <3-ECU>-> 
+ Add  YUANJING-BCM(2015) option
  in <4-IMMOBILIZER>-> 
+ Add  T600-SMARTBOX(2014) 
  option in <4-IMMOBILIZER>-> 
+ Add  ECOSPORT-DASHBOARD(2015) 
  option in <5-DASHBOARD>-> 
+ Add  REGAL-AIRBAG(2018) option in
  <7-AIRBAG>-> 
+ Add  TOUAREG-CHASSIS-MODULE(2010)
  option in <8-OTHER>-> 
* Fix some bug

VVDI Prog v4.9.9 (2021-02-03)
* This version DON't need update
  firmware
+ Add VVDI PROG USER MUNUAL 4.9.9
  version in Doc folder
+ Add EPCS1,
  EPCS16,
  EPCS128,
  EPCS4,
  EPCS64 options in
  <1-EEPROM&FLASH>->
+ Add AT59C11,
  AT17C128,
  AT17C256,
  AT26DF081 options in
  <1-EEPROM&FLASH>->
+ Add EN25x05,
  EN25x10,
  EN25x16,
  EN25x20,
  EN25x32,
  EN25x40,
  EN25x64,
  EN25x80 options in 
  <1-EEPROM&FLASH>-> 
+ Add BR9010,
  BR9020,
  BR9040 options in 
  <1-EEPROM&FLASH>-> 
+ Add S-29255,
  S-29355 options in 
  <1-EEPROM&FLASH>-> 
+ Add R5F10ExAx_Flash_16KB_Write,
  R5F10ExCx_Flash_32KB_Write,
  R5F10ExDx_Flash_48KB_Write,
  R5F10ExEx_Flash_64KB_Write,
  R5F10E_Data_4KB_Write
  options in 
  <2-MCU>-> 
+ Add M30622F8,
  M30623F8,
  M3062CF8,
  M30620FC,
  M3062LFG,
  M30626FH,
  M30626FJ,
  M30621FC,
  M3062AFC,
  M3062BFC,
  M306N4FG,
  M30625FG,
  M30627FH,
  M3062JFH,
  M30627FJ,
  M306N4FC
  options in
  <2-MCU>->
+ Add M30843FW,
  M30843FH,
  M30833FJ,
  M30835FJ,
  M30843FJ,
  M30845FJ,
  M30853FJ,
  M30855FJ,
  M30845FW,
  M30853FW,
  M30855FW,
  M30845FH,
  M30853FH,
  M30855FH,
  M30880FW,
  M30882FW,
  M30880FH,
  M30882FH,
  M30880FJ,
  M30882FJ
  options in
  <2-MCU>->
+ Add R5F64525_UART,
  R5F64524_UART
  R5F6452M_UART,
  R5F6452N_UART
  options in
  <2-MCU>->
+ Add R5F11N/11PxFx_Flash_96KB_Write,
  R5F11N/11T/11RxGx_Flash_128KB_Write,
  R5F11NxEx_Flash_64KB_Write,
  R5F11N_Data_4KB__Write    
  options in      
  <2-MCU>-> 
+ Add R5F107xCx_Flash_32KB_Write,
  R5F107xEx_Flash_64KB_Write,
  R5F107_Data_4KB_Write
  options in 
  <2-MCU>->
+ Add R5F10MxEx_Flash_64KB_Write,
  R5F10MxGx_Flash_128KB__Write    
  options in 
  <2-MCU>-> 
+ Add R5F10Rx8x_Flash_8KB_Write,
  R5F10RxAx_Flash_16KB_Write,
  R5F10RxCx_Flash_32KB_Write,
  R5F10R_Data_2KB__Write
  options in 
  <2-MCU>->
+ Add R7F701201,
  R7F701205,R7F701501,
  R7F701502,R7F701503,
  R7F701506,R7F701507,
  R7F701508,R7F701511,
  R7F701512,R7F701513,
  R7F701521,R7F701522,
  R7F701524,R7F701525,
  R7F701526,R7F701527,
  R7F701528,R7F701529,
  R7F701530,R7F701531,
  R7F701534,R7F701708,
  R7F701709,R7F701710,
  R7F701711,R7F701714,
  R7F701715,R7F701644,
  R7F701645,R7F701646,
  R7F701647,R7F701648,
  R7F701649,R7F701650,
  R7F701651,R7F701652,
  R7F701653,R7F701684,
  R7F701685,R7F701686,
  R7F701687,R7F701688,
  R7F701689,R7F701690,
  R7F701691,R7F701692,
  R7F701693,R7F701694,
  R7F701695,R7F701032,
  R7F701371,R7F701372,
  R7F701396,R7F701373,
  R7F701374,R7F701397,
  R7F701A22 options in 
  <2-MCU>-> 
+ Add D70F3461 option in
  <2-MCU>->
+ Add CEM(R5F64524),
  CEM(R5F64525)
  options in 
  <4-IMMOBILIZER>-> 
+  Add LEXUS(R7F701A22) option in
  <7-AIRBAG>->
+ Add B48(ADAPTER) option in
  <10-BOSH-ECU-ADAPTER>->
* Fix some RH850 options
* Fix some STM8 options