New Ford Rotunda Dealer IDS VCM FAQ software download


Matched product:

[Ship from UK NO TAX]VCM Rotunda For Ford Dealer IDS VCM V86 JLR V135

[Ship from UK NO TAX]VCM Rotunda For Ford Dealer IDS VCM V86 JLR V135

Latest price:299.00
189.0037% off
  • Item No. SP10-B
VCM Rotunda For Ford Dealer IDS VCM V86 JLR V135 from CardiagTool.co.uk :
1 1997-2014,updated by CD.
2 It mainly works with airbag,abs,srs,fault code. Ford vcm has two parts software in CD,one is IDS for ford and Mazda,another is jlr for Jaguar and Landrover.
3 Multi-language

ford-vcm-v73-setup-introduction.pdf  (750K)

ford-vcm-v126-software-setup-instruction.pdf  (1.7M)

FORD VCM software download,
Ford vcm installation step,
ford vcm update

VCM license ids v86 download:

http:// www.obd2vip.com/download/vcm-license-r13.14-ids-v86.zip

VCM license IDS V85 download:

http://www.obd2vip.com/download/ford-vcm-ids-license-v85.zip

Ford VCM requirements on installation:

1.1 Please install IDS and JLR to Local Disk C
IDS software is for FM, and it must be installed to Local Driver C;
JLR software is for Jaguar and Land Rover, and Local Driver C is also required.
Moreover, at least 15G available space is required on your Local Driver C when installing the software.

1. 2 Requirements on computer configuration 
Computer memory: at least 1GB
CPU: at least 1GHz
Notebooks (ULPC: Ultra low-cost PC) not allowed

1.3 Requirements on computer USB interface
Every laptop has more than one USB ports, one of them is the MAIN PORT, and others are AUXILIARY PORT, please make sure the USB port works and use MAIN PORT

1.4 Requirements on computer operating system
For computer operation system, please use Windows XP (sp2 or sp3) professional Edition 32-Bit.
Home Edition and other systems are not allowed

1.5. Need install the convert software and follow the instruction.
Note that the application will detect the interface device that is connected to the laptop. Indicator icons will appear at the bottom right-hand corner of the IDS screen when the VCM are connected.

Ford VCM FAQ

Q: What is good for this item?
A: The diagnose function is very well.Can do four cars.If you do not know how to upload this software,please send email to us,we will provide best techinical service.

Q: What is the latest cars models this tool works with?
A: VCM works with both old and new ford and Mazda cars models,and works with landrover and rang rover from 2005-2010 year.

Q: My computer drive (C:)  is only 6G memory available. Can I install Ford VCM software to the drive (D:)?
A: No, you cannot. IDS software and JLR software need to be installed to Drive (C:) and at least 15G memory available.

Q: the VCM and IDS I buy are from two different sellers, can I use them together?
A: No, better use the VCM and its matching IDS from one same seller. Maybe the VCM and IDS version from different sellers is not the same and it is possible to damage the device if they work together.

Q: VCM software includes Ford & Mazda IDS, Jaguar & Land rover (JLR), Can they be installed on the same computer?
A: Better install them on two different computers, we have some customers who tried to install on the same computer, but failed.
 
Q: Rotunda Dealer IDS VCM fails to communicate, the indicator light is red, is the device broken?
A: There are 3 possible reasons: 1) Make sure the software is installed successfully and License need to install. 2) Well connect the cable between VCM and the car. 3) Check whether the VCM local area connection RTL8150 is connected, whether the packet “sent” and “received” is changing.

Q: I need Spanish VCM, do you have?
A: When the VCM is installed, it is multi-language available to select: English, German, French, Italian, Spanish, Netherlands, Swedish, Danish, Norwegian, Portuguese and Slovak, but after the software is installed, the language can’t be changed, unless the software is reinstalled.

Q: I have two questions about Mazda and Jaguar. One: do they need to install License? Two: what is the password calculator written on Ford CD use for?
A: yes, Mazda and Jaguar need install License. The password calculator written on Ford CD is used to calculate Incode when the VCM is used to make key

Q: When Ford VCM is installed, error message displays “Crack failed”
A: Crack fails means license fail. When the license is installed, the anti-virus software should be uninstalled, only after the VCM software is installed can the license run. After you install successfully the VCM IDS software, reboot the computer, then install the license, finally open the VCM software, if the VCM IDS software is opened, the license can’t be installed.

Q: I install all the software on the license patch, when I open IDS license file, it can’t be used, an error message reading “Windows cannot access the specified device, patch, or file. You may not have the appropriate permissions to access the item”.
A: this error suggests that the patch can’t work. Since the VCM software isn’t compatible with your computer, advice you use Windows XP professional. And when the VCM PATCH runs, the installed VCM software can’t be opened.

Q: The VCM programming menu lost, what to solve?
A: Please contact us to send you file “ExtendProgramming” file to reset.

Q: Can I use Ford VCM to change VIN.
A: yes, Ford VCM supports changing VIN. But it requires you are skilled in changing VIN.

Q: Does Ford VCM support PCM initialization for Mazda RX8 2006?
A: yes, VCM support PCM initialization for Mazda up to 2010.

Q: Is your VCM with VMM?
A: No, our VCM isn’t with VMM.

Q: I'm searching device to encode and password pulling cars like the Volkswagen Jetta 2011 and 2012 that saw you which device would sell and what would be the value? And appliance pulls which encrypts the password and the goal generation 6 2013?
A:  VCM doesn’t support ECU programming; please contact us for remote assistance. When use VCM to read data stream, you are only allowed to choose 1 to 3 options, choose more will lead to the computer freeze up.

Q: When the JLR software of VCM is installed, it needs username and password, how to solve ?
A: A: there are 2 possible reasons: 1) the license is not installed 2) the license is installed, but it still needs username and password, check whether your computer windows system is compatible with JLR software, JLR software requires Windows XP(sp2 or sp3) professional Edition 32-Bit, Computer memory:  at least 1GB, CPU: at least 1GHz, Netbooks (ULPC:Ultra low-cost PC) not allowed.


Any questions, please don't hesitate to contact us.

Email: sales@CarDiagTool.co.uk   
Skype:CarDiagTool.co.uk