2M2 Magic Tank Car Key Cutting Machine FAQs
Problem: 2M2 Magic Tank Key Cutting Machine Break Probes and Cutters, how to solve?
Solution:
Please follow 3 steps to solve the problem:
Step 1: Please loosen the screws and diassemble the cover of the machine(Depend Upon pictures)
Step 2: Check the line, plug and socket whether it is connected
Step 3: When all is OK above the instructions, please operate as Video belows.
https://youtu.be/SVYhm8FfwQc
1) If the App keep appearing symbol, sensor touch is OK
2) if no appearing symbol, please send me the video that troubles, thank you.
Email: sales@cardiagtool.co.uk
Problem: After calibrate left side ,right side is not equal
Left side=2.9mm
Right side =3.0mm
Solution: Dear friend,please ignore the number of calibration,the position of cutter and tracer depend upon the number after calibration, so the number has a little tolerance that is normal.
The most important is to put the blade 25# into the right position. that is okey.
How to replace the cutter/probe on Magic Tank