CMD CAN Flasher V1251 read and write flash memory via the diagnostic connector on the CAN line of computers with motor MED9.1, MED9.5, EDC16U3x/CP, EDC16CP31, EDC16CP36, EDC16C3 and EDC16C9 fuel injection. Working through CAN, not on K line.
CardiagTool.co.uk supply you cheapest MPPS V13.02 Chip Tuning tool.Supports the latest drivers EDC16, EDC17, MED9.x, Siemens PPD1 / x, EDC15, ME7.xi much more ... Professional performance, without unnecessary boxes and cables. All electronics in OBD2 connector.
Galletto 1260 is a ECU programmer for universal car. Working on EDC16,EDC15, MEx.x ,DELCO and many more engine4s ecu. It is compatible with the newest modern diesel TDi, HDi, JTD, and petrol cars.
Motorola 711 MC68HC11 Programmer is a ecu programmer for Motorola chips.
With the help of powerful functions, MT3500 Hand-held Auto Engine Analyzer supplies serial testing items, and meets serial testing demands. Advanced 32 digit main control CPU and 16 digit assistant processor, LCD display, 16 grades,160X160, easy to show the details of the signal waveforms.
The MC68HC908AZ60 programmer supports Motorola MC68HC(9)08AZxx/ASxx, MC68HC05H12 microcontrollers internal EEPROM and FLASH reading, programming. This MCU most used in automotive computers (dashboards, AIRBAG, immobilizers).
BDM Frame with Adapters Set Fit original FGTECH B Version, is used for Fgtech ecu tool, and also can use on BDM 100.
Galletto 1260 RL232 imported chips is an easy hardware for auto chip tunning.Galletto 1260 is compatible with the newest modern diesel TDi, HDi, JTD, and petrol cars.Supported Languages: English, Spanish, French, German, Italian, Portuguese.
MC68HC705B16 programmer supports programming of Motorola 68HC05Bxx,68HC05Xxx microcontrollers internal EEPROM -most used programmable device in car radios,automotive computers (dashboards, AIRBAG, immobilizers).
Audi VW micronas/Fujitsu programmer 2.0 replace the R200 and R250 fully function, audi vw micronas prog 2.0 supports mileage change for VW Audi.
D80D0WQ ERASER/Programmer is used to Read, Program, Erase Incremental Registers\EEPROM. Compatible with Windwos 98/2000/XP
FGTech Galletto 2-Master this new system developed with high-speed USB2 technology is the fastest and most secure product on the market, it is easy to install and use by anyone.
LabTool-48UXP lets you select the verify voltage after you have programmed the device.The Vcc voltage can be 2.0V to 6.5V.This feature ensures that your device has been programmed properly, preventing failures due to programming errors and ensuring data retention.
SPI28 ecu programmer is used for universal car chips.With the help of this interface the tuning technician is able to load a modified file into the ECU without the previously unavoidable hassle of mechanical jobs on that very unit.No need to dismantle the ECU.
ECU TOOL for the complete access to all EEpromdaten with VAG-engine control units of type EDC15 and ME7. Read and write access to the EEprom. Reading the secret odometer (if stored in the engine control unit). Immo-off function, login display, VIN change - everything about the diagnosis socket - not removing the ECU. With the write function is motor control "cloning" - no need to teach. Indispensable for workshops, recovery or Chiptuning.
COM connector and support USB connector as well, Mileage correction reset your the mileage by directly input the
Works on CPUs use NEC board, support userself upgration.