OPCOM 2014 covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B. Op com for opel lets you read and clear fault codes, support many control units.
Opcom OP-Com 2014V For Opel
Buy it for 4 reasons:
1 Newest Version: 1.59
2 Very stable function for opel 1998-2014.
3 There is no need to active the software, can be used directly.
4.Software and Hardware Connection PDF
1 Language:English only
2 Never Update It Online,It Will Damage The OP-COM!
3 This software only can installed on XP system ,with no anti-virus software in.
OPCOM 2014 Function:
1. It covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.
2. The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test.
3. The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples.
4. Since Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.
PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
5. Fault codes will be shown with all available information
OPCOM 2014 Feature:
1) Full status information (Present, Not present, Intermittent)
2) You can print out, save, or copy the fault codes to any other application. From the fault codes window, you can go directly to the measuring blocks window.
3) The program shows you measuring block information on many control module, you can choose anything from the list on your own.
4) The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!
You can also run output tests on many controllers.
HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps
MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps
OPCOM board Display:
1. OP COM Interface
2. USB Cable
3. Software and Drivers CD
1) I did a quick test on Astra J 2013 year and it worked well. Connection to all modules.
In some of them there are only error reading but anyway it is a big progress since the 2010 version and a light at the and of a tunnel for future updates.
2) I try on astra-h working good firmware 1.45
3) Vectra B 2.0 dtl. All work.
4) corsa c z10 work ok
5) opel vivaro 2002 1.9dti work
6) work fine with Astra 2012, 2.0 diesel
7) opel vectra c 2004 all ok.
8) Woks Ok for me in all modules ,the program update firmware but all is ok
I made a diagnose on all controlers of a corsa c 2001 z10 xe. And work fine.
9) Tested on Vectra b and it’s working like a charm.
More Items Shipped from UK Warehouse
Any questions, please don't hesitate to contact us.Email: sales@CarDiagTool.co.ukSkype:cardiag.co.ukWhatsapp:+86 15902797813
After sale service:Almost all item has one year warranty.
We also offer free fix to almost item we sold within one year,free repair.Man-made damage need pay.We not offer warranty on keys,cables,adapter,online sent software,please notice it.