New Genius & Flash Point K-touch is the world’s first Touch & Map device which allows reading / programming the ECU in modern vehicles over OBD2.It is able to work without connection a computer during the critical phases of reading and writing of the ECU, ensuring the process is executed in complete safety. As a completely independent tool, the risks of working with a PC can be avoided, risks such as stalling, Windows crashes, power failure etc…
New Genius & Flash Point OBDII/BOOT Protocols ECU Supprorted All Vehicle Catgeories
Buy it for 8 reasons:
1.Genius tuning tool
2.Support All Vehicles,Support both petrol and diesel vehicles
3.Update via USB
4.Hand-Held Chip Tuning Tool,easy to read/write ecu.
6.Free ECM Chiptuning 2001 V6.3 and winols 2.24 included
7.Latest Firmware 5.005 version. New adds more newer ECUs.
V5.05 firmware support more ECUs than the old version. Click here to know new genius ECU tool supported ECUs list.
New version support vag DQ500 while other old version does not support. here is the screenshot:
8.Unlited tokens version.
There is 30 tokens by default, after the tokens used out.
Just click this button and token will be charged.It has the tokens reset button on the back of main unit.
1 Can be installed on both Windows XP and Win7.
One Windows XP Programmer save in our CD, please use our windows xp programmer to install this software.
2 Cannot connect with internet when you use.
The New Genius supports CAN-BUS, KWP and J1850 protocols and has communication modules available for the following vehicles:
It is equipped with a sophisticated system for the recovery of the ECU should any problems occur during programming.
The New Genius is controlled through a system of icons from your TOUCH PANEL touchscreen, this makes it extremely easy to use. A standard 16 pin OBD cable is included and specific connectors to work on making diagnosis and special cables to do so through direct connection to the connector or plate ECU.
Easy to use thanks to its touch screen and intuitive menu.
Completely independent of the PC during the phases of read / write.
System automatic backup.
SD 1 GB expandable memory (expandable to 16 GB)
System updates via USB.
ABS plastic enclosure with ergonomic grip system safe.
LCD display 320 x 240 pixels, CCFL back light with Touch Panel.
Flash memory chip 512K bytes protected.
16 MB RAM memory.
SD card of 1 GB expandable.
LED status SD.
Internal clock with memory.
Lithium 3 volts.
Rechargeable battery 600 mAh 8.4V.
Supply voltage from 12V to 30V.
Communication via K line, L line, CAN-bus 2.0 and J1850.
Available in Master version
As a consequence of the requests received from the market, a specific software has been developed for the independent management of New Genius called DS Manager. This is dedicated to skilled tuners who prefer to develop tuned files with third party editing software. DS Manager can decrypt and encrypt files received from New Genius, so allowing the possibility to export files for the modification. No editing functions are supported. Also for this specific software, a specific tool for the automatic checksum recalculation is provided.
CGDI MB Key Programmer and Accessories
K-touch software :
1. ECU Chip tunning software: it is unfriendly and you are supposed to be skilled enough to use it.
2. Boot wiring diagram and instruction.
3. K-touch setup software: the folder "setup3" contains "setup3 manually.zip" and "setup3 xp automatic.exe" , xp user just directly click "setup3 xp automatic.exe" and follow the prompt to operate; win7 user firstly extract file "setup3 manually.zip" and get "raceloc.dll", then manually replace raceloc.dll C:\Users\Your PC Name\AppData\Local\DimWare\RaceEVO\7.0.
4. TF FIX folder contains a video on how to reset the TF program. Note: change other TF card is not allowed, you have to use the built-in TF card.
5. How to renew the token video demo. After renew the machine get 30 tokens.
6. Install read me. Txt: contain simple setup instructions.
7. K-touch vehicle list for reference.
8. K-touch install on win7 procedure. Note: disconnect the network connection when you install and use k-touch, update device and software is not allowed.
9. K-touch install on windows xp procedure. Note: disconnect the network connection when you install and use k-touch, update device and software is not allowed.
10. Decompression software
Difference between Genius and KESS V2
||Best Quality Kess V2 (SE87-D)
||English, Italian, German, French, Spanish, Portuguese,
|English, German, Spanish, Italian, Portuguese, French
||No Tokens Limitation,30 Tokens come with device by default, you can press the tokens reset buttonon the back of hardware to get new Tokens
||No Tokens Limitation, there is renew buttonon the main unit. This button is used to charge tokens. Once your tokens run over, just click this button, then tokens will go back to 30 tokens.
||Supports CAN-BUS, KWP and J1850 protocols
||Line, CAN, EDC17 and MED17 and Ford J1850
||Car, Bikes, LCV
Support more new vehicle than Kess V2
|Car and Bike
||Hand-held ECU Chip Tuning Tool, no PC need; software is inside the machine already directly to use
||PC-based ECU Programmer, you need install the software by yourself
||Read and Write ECU via OBD2 directly
How do you know if new genius support your cars or not?
Such as your car is marelli iaw 7sm, search on this list, you will find your ECU is FLASH_0436
More Items Shipped from UK Warehouse
Any questions, please don't hesitate to contact us.Email: sales@CarDiagTool.co.ukSkype:cardiag.co.ukWhatsapp:+86 15002705698
After sale service:Almost all item has one year warranty.
We also offer free fix to almost item we sold within one year,free repair.Man-made damage need pay.We not offer warranty on keys,cables,adapter,online sent software,please notice it.
New Genius & Flash Point OBDII/BOOT Protocols ECU Hand-Held Chip Tuning Tool Error Solution
New Genius & Flash Point K-touch Test Report:
tricore edc17c10 all ok
EDC17C64 ID & WRITE ok (1.6TDI)
MED17.5.5 ID & READ & WRITE ok
ME7.5 ID & READ & WRITE ok
MED17.5.21 ID & WRITE ok
Sagem 3000 ID & READ & WRITE ok
Opel ME7.6.2 ID & READ & WRITE ok
Mercedes EDC16C2 ID & READ & WRITE ok
Simos 12 & 18 ID & WRITE ok
Checksum recalculated with Genuine Race Evo software for all of my tunes.
2014 Ford Fiesta Ecoboost 1.0 125hp auto
-> Read ok
-> Write ok
2013 Mitsubishi ASX/Outlander Sport 2.0 4B11 CVT
-> Read ok
-> Write ok
2014 Chevrolet Orlando 1.8 Petrol Auto
-> Read ok
-> Write ok
2015 Mitsubishi Montero Sport/Pajero Sport 2.5DiD 178hp auto
-> Read ok
-> Write ok
Can make Opel Zafira , Combo , Meriva Denso ECU
Tested psa edc17c10 read on boot and test write by obd ok
Q: How to solve New genius "Raco EVO fatal error: Invalid version of Raceloc.dll" problem?
A: This error is caused by the system. Please use the following solution:
1) First use this way: download this file: http://www.mediafire.com/download/u02k37lnu1mnui3/se128_install2.zip. And install it.
2) If this way cannot solve, then change to use our XP system.
Tested and working
If you meet this problem,please change back our XP system,this means your system is not fitting.
Q: Can i use new genius edite the ECU file and write it to new ECU?
A: For all our ECU programmer up to now, like New genuis, K-TAG, Kess v2 and fgtech. All can read the data from Old ECU and write it to new one. But cannot change or edite the ECU data you read out from the old ECU. If you want to change, you can choose ECM TITANIUM on our website, or something enable you change the ECU file. Then use our ECU programmer to write it to new ECU.
Another thing you need pay attention is, after you change the data, you need to use the tool which you use to change the data to do checksum