MPPS V18 MAIN + TRICORE + MULTIBOOT with Breakout Tricore Cable
This module adds support for advanced functions on Marelli ECU’s. MPPS covers a range of controllers including M3.8, M5.9, ME7xx, MED9, MED17, EDC15/16/17, Delphi, Siemens, Marelli, Delco, Sagem, Trionic and many others…
- MPPS V18 MAIN + TRICORE + MULTIBOOT with Breakout Tricore Cable
- Warranty: one year
- Latest Software version: V22.214.171.124
- Package comes with Breakout Tricore cable.
Software: V126.96.36.199, Firmware: V 1.08.21
Support System: Win7 32bit 64bit
Support Multi Languages.
MPPS V18 Features:
Read / Write of Micro, Flash and EEprom without using a BDM programmer!
Fiat 6F3 – Full Read / Write Micro, Flash and EEprom over K-line and CAN.
Fiat 6JF – Full Read / Write Micro and EEprom over K-line.
Fiat 8DF – Full Read / Write Micro and EEprom over K-line.
Fiat 8F2 – Full Read / Write Micro and EEprom over K-line and CAN.
Fiat 8F3 – Full Read / Write Micro and EEprom over K-line and CAN.
Fiat 8GM – Full Read / Write Micro and EEprom over CAN.
Fiat 8GS – Full Read / Write Micro and EEprom over CAN.
Fiat 5SF3 – Full Read / Write Flash and EEprom over CAN.
Fiat 5SF3 – Full Read / Write EEprom over K-Line.
Fiat 5SF8 – Full Read / Write Flash and EEprom over K-line and CAN.
Fiat 5SF9 – Full Read / Write Flash and EEprom over CAN.
Fiat ME7.9.10 – Full Read / Write Micro over CAN.
Fiat ME7.6.3 – Full Read / Write Micro over CAN.
Opel 6O2 – Full Read / Write Micro, Flash and EEprom over K-line and CAN.
Opel 6O3 – Full Read / Write Micro, Flash and EEprom over K-line and CAN.
Opel 6JO – Full Read / Write Micro and EEprom over K-line.
This module adds boot mode support for controllers with the tricore processor. Features:
Auto detects ECU and processor type. No need to select from list, everything is automatic!
Read/Write of all memories Eeprom, Irom, Xrom (where possible)
Patch function for OBD Flashing of TPROT ECU’s (supports only VAG at the moment)
TPROT / DS check feature, for testing if TPROT is active without opening ECU.
Supports Bosch upto TP12
Supports Siemens (current only for ECU’s without password protection),
Support for unlocking of VAG Simos PCR and Simos 8.
Checksum Correction supported for Bosch MEDC17.
The MPPS is a powerful programming tool. It offers general reading / writing operations and checksum support, however it also includes some additional features:
Excellent recovery functions. In some cases MPPS can recover ECU’s which others tools can not even make communications with. On certain controllers it even works when with no program is present (a blank memory).
Selectable full / partial reading and writing when the ECU allows this function.
Selectable reading / writing speed.
Writing “changes only” function for faster programming (when supported by the ECU).
Auto detection of K-Line/CAN, and option to bypass and force preferred means of communication.
Temporary bypass of immobiliser to allow flashing on the bench on ME7 systems.
Boot mode support for ECU’s with C167 and ST10 processors.
EEprom read/write functions for some ECU’s are included.
VAG MEDC17 TPROT level checking without opening the ECU.
MPPS V18 Review/Feedback from customers:
1. for those who has message "there has been an application exception error" when try to open the program, here is how I solve it:
Copy the software in c:\mpps
create shortcuts on the desktop for mpps, multiboot, tricore boot.
run only from shortcuts
2. MPPS V18 China clone:
Tested on boot volvo edc17cp22. ok.
marelli 6o2 multi k-line ok.
Software Figures Shown as Follows:
MPPS V18 Diagram:
PCB Board Display:
1pc x MPPS V18
1pc x Breakout Tricore cable
1pc x CD Software
MPPS V18 Review:
Q:What is the meaning of ”TRICORE + MULTIBOOT” for MPPS v18?
A:That means a way to dissemble the ecu, weld the boot chip point, and use ecu adapter definition to read ECU data.
MPPS V18 supports Tricore, MultiBoot, OBD.
Q: What is the meaning of ”breakout” among MPPS v18 Breakout Tricore Cable?
A:It is the connector adapter.
Q: Can Mpps v18 support C167 and ST10?
A: Yes, Boot mode support for ECU’s with C167 and ST10 processors.
Q: MPPS V18 can auto detect K-Line?
A: Yes, it support auto detection of K-Line/CAN.
Q: What about MEDC17 TPROT level checking through mpps?
A: VAG MEDC17 TPROT level checking without opening the ECU.
Q: Any option to bypass?
A: MPPS V18 has option to bypass and force preferred means of communication; temporary bypass of immobiliser on ME7 system.
Q: V18 for eeprom r/w?
A: Yes, EEprom read/write functions for some ECU.
Q: Can Mpps v18 support immo off without welding the boot chip?
A: MPPS v21 doesn’t support immo off. And Mpps v18 conenct to the vehicle with obd2 port, no need welding.
Q:Can MPPS v18 be connected with internet?
A:You’d better not.
Q:Kess v2 vs MPPS v18
A:Kess v2 is better, more features and possibilities. but mpps v18 is working very stable for a kess do PCR 2.1
Autel Maxisys Elite, contact us for the best price
Highly Recommended Universal Key Programmer
Any questions, please don't hesitate to contact us.Email: sales@CarDiagTool.co.ukSkype:cardiag.co.ukWhatsapp: +86 15002705698
After sale service:Almost all item has one year warranty.
We also offer free fix to almost item we sold within one year,free repair.Man-made damage need pay.We not offer warranty on keys,cables,adapter,online sent software,please notice it.